Publication detail

The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024

Štěpán Kolomý, Marek Doubrava, Martin Harant, Daniel Chrást, Milan Forejt, Josef Sedlák

English title

The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024

Type

WoS Article

Language

en

Original abstract

Currently a reduction of carbon emissions is one of the key things in the automotive industry. Thanks to the development of aluminium alloys, which possess favorable weight to strength ratio the reduction can be performed. Therefore, this study is focused on the mechanical behaviour and formability of the heat-treated AA2024 in sheet form with a thickness of 1 mm, which was tested under different strain rates. The microstructure in as-received (T3) state exhibited a tendency to create preferential orientation along the rolling direction. The grain size yielded an 4.9 % and 4.4 % increase in longitudinal and transverse planes after heat treatment (solution treatment and water quenching), respectively. The microstructure of AA2024-T3 consisted of numerous Al-Cu-Mn-Fe and Al-Cu-Mn precipitates, which corresponded to higher mechanical properties. The mechanical behaviour tested imminently after heat treatment manifested by yield strength decrease of 52.3 % under strain rate 0.0008 s–1 and 54.8 % under strain rate 0.18 s–1, respectively. This phenomenon was caused by dissolution of precipitates and oversaturating α matrix with alloying elements. The heat-treated material featured a negative strain rate sensitivity, phenomenon that can be attributed to dynamic strain aging, which was further confirmed by the presence of the Portevin-Le Chatelier effect.

Keywords in English

Aluminium alloy 2024 · Strain rate · Mechanical behaviour · Heat treatment · Microstructure · Tensile testing

Released

2026-03-28

Publisher

Springer Science and Business Media LLC

Journal

International Journal of Advanced Manufacturing Technology

Number

March 2026

Pages count

14

BIBTEX


@article{BUT201795,
  author="Štěpán {Kolomý} and Marek {Doubrava} and Martin {Harant} and Daniel {Chrást} and Milan {Forejt} and Josef {Sedlák}",
  title="The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024",
  journal="International Journal of Advanced Manufacturing Technology",
  year="2026",
  number="March 2026",
  pages="14",
  doi="10.1007/s00170-026-17905-0",
  issn="0268-3768",
  url="https://link.springer.com/epdf/10.1007/s00170-026-17905-0?sharing_token=69BAxmd4i1as2qlwZdPk-_e4RwlQNchNByi7wbcMAY6tcfWElDGFkd2EpNLMW_pmE88mD7WPkiPFjx6yhvhqsSYVauCFZFkHcHl5LGk1k67Y-NZSS5Y-R_ZzFTq7zTDmDmv01e_wPCXKG4KgBoQUrTulTprx_1Ck2QU7tT1zXSg%3D"
}