Array
(
[page] => 101
[item_count] => 2086
[items_per_page] => 15
[data] => Array
(
[0] => Array
(
[vysledek_id] => 73751
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 93948
[vysledek_rok] => 2011
[nazev] => Design of fuzzy logic controller for DC motor
[nazev_orig] => Design of fuzzy logic controller for DC motor
[duvernost_udaju_id] => S
[popis] => This contribution presents a simple and efficient approach to the fuzzy logic controller design and simulation. The proposed controller uses a Sugeno type fuzzy inference system (FIS) which is derived from discrete position state-space controller with an input integrator. The controller design meth-od is based on anfis (adaptive neuro-fuzzy inference system) training rou-tine. It utilizes a combination of the least-squares method and the back-propagation gradient descent method for training FIS membership function parameters to emulate a given training data set. The proposed fuzzy logic controller is used for the position control of a linear actuator which is a part of a Stewart platform.
[popis_orig] => This contribution presents a simple and efficient approach to the fuzzy logic controller design and simulation. The proposed controller uses a Sugeno type fuzzy inference system (FIS) which is derived from discrete position state-space controller with an input integrator. The controller design meth-od is based on anfis (adaptive neuro-fuzzy inference system) training rou-tine. It utilizes a combination of the least-squares method and the back-propagation gradient descent method for training FIS membership function parameters to emulate a given training data set. The proposed fuzzy logic controller is used for the position control of a linear actuator which is a part of a Stewart platform.
[klicova_slova] => fuzzy logic, controller
[klicova_slova_orig] => fuzzy logic, controller
[url] =>
[oecd_obor_id] => 20301
[odpovedny_utvar_id] => 183
[odpovedny_utvar_nazev] => Institute of Production Machines, Systems and Robotics
[odpovedny_utvar_zkratka] => IPMSR
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ANDRŠ, O.; BŘEZINA, T.; KOVÁŘ, J.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-3-642-23243-5
[identifikator_popis] => ISBN - Mechatronics Recent Technological and Scientific Advances
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ANDRŠ, O.; BŘEZINA, T.; KOVÁŘ, J. Design of fuzzy logic controller for DC motor. In Mechatronics Recent Technological and Scientific Advances. 1. Varšava: Springer, 2011. p. 9-18. ISBN: 978-3-642-23243-5.
[citace_html] => ANDRŠ, O.; BŘEZINA, T.; KOVÁŘ, J. Design of fuzzy logic controller for DC motor. In Mechatronics Recent Technological and Scientific Advances. 1. Varšava: Springer, 2011. p. 9-18. ISBN: 978-3-642-23243-5.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT73751,
author="Ondřej {Andrš} and Tomáš {Březina} and Jiří {Kovář}",
title="Design of fuzzy logic controller for DC motor",
booktitle="Mechatronics Recent Technological and Scientific Advances",
year="2011",
series="1",
number="1",
pages="9--18",
publisher="Springer",
address="Varšava",
isbn="978-3-642-23243-5"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20301
[oecd_tree_podobor_nazev] => Mechanical engineering
[poznamka_metriky] =>
[nazev_en] => Design of fuzzy logic controller for DC motor
[popis_en] => This contribution presents a simple and efficient approach to the fuzzy logic controller design and simulation. The proposed controller uses a Sugeno type fuzzy inference system (FIS) which is derived from discrete position state-space controller with an input integrator. The controller design meth-od is based on anfis (adaptive neuro-fuzzy inference system) training rou-tine. It utilizes a combination of the least-squares method and the back-propagation gradient descent method for training FIS membership function parameters to emulate a given training data set. The proposed fuzzy logic controller is used for the position control of a linear actuator which is a part of a Stewart platform.
[klicova_slova_en] => fuzzy logic, controller
[vysledek_datum] => 2011-09-21T00:00:00+02:00
)
[1] => Array
(
[vysledek_id] => 69246
[vysledek_druh_id] => VZ
[ex_vysledek_id] => 22744
[vysledek_rok] => 2007
[nazev] => Experimentální bezdrátový snímač vibrací
[nazev_orig] => Experimentální bezdrátový snímač vibrací
[duvernost_udaju_id] => S
[popis] => Zařízení je určeno pro měření vibrací za nestandardních podmínek. Snímač je vybaven vlastním zdrojem napájení a vysílačem. Snímač jako celek má extrémně malé montážní rozměry, což ho ve spojitosti s užitím bezdrátového přenosu dat předurčuje pro měření na místech kde není možno použít běžné způsoby měření.
[popis_orig] => Zařízení je určeno pro měření vibrací za nestandardních podmínek. Snímač je vybaven vlastním zdrojem napájení a vysílačem. Snímač jako celek má extrémně malé montážní rozměry, což ho ve spojitosti s užitím bezdrátového přenosu dat předurčuje pro měření na místech kde není možno použít běžné způsoby měření.
[klicova_slova] => snímač vibrací, ADXL
[klicova_slova_orig] => snímač vibrací, ADXL
[url] =>
[oecd_obor_id] => 10201
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => VĚCHET, S.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Applied results
[druh_nazev] => Functioning sample
[druh_popis] => Functioning sample
[stav] => Approved
[vysledek_kategorie_id] => AV
[vysledek_system_kategorie_id] => PD
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => VĚCHET, S.: Experimentální bezdrátový snímač vibrací. (Funkční vzorek)
[citace_html] => VĚCHET, S.: Experimentální bezdrátový snímač vibrací. (Funkční vzorek)
[citace_rtf] =>
[citace_bibtex] => @misc{BUT69246,
author="Stanislav {Věchet}",
title="Experimentální bezdrátový snímač vibrací",
year="2007",
note="Functioning sample"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10200
[oecd_tree_obor_nazev] => 1.2 Computer and information sciences
[oecd_tree_podobor_id] => 10201
[oecd_tree_podobor_nazev] => Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8)
[poznamka_metriky] =>
[nazev_en] => Experimental wireless vibration sensor
[popis_en] => This experimental sensor is applied in special measurement cases. Device has small dimensions and for data acquisition is used wireless transmission to the PC.
[klicova_slova_en] => vibration sensor, ADXL
[vysledek_datum] => 2007-10-30T00:00:00+01:00
)
[2] => Array
(
[vysledek_id] => 56659
[vysledek_druh_id] => REPORT
[ex_vysledek_id] => 30977
[vysledek_rok] => 2002
[nazev] => Návrh automatického řízení spalování u spalovenského kotle
[nazev_orig] => Návrh automatického řízení spalování u spalovenského kotle
[duvernost_udaju_id] => S
[popis] => Etapová zpráva se zbývá vyhodnocením a shrnutím poznatků z úprav, které byly doposud realizovány na spalovenském kotli ve spalovně SAKO Brno.
V další části jsou zpracovány časové průběhy vybraných provozních veličin s cílem získat podklady pro posouzení rezerv v provozu daných kotlů. Podstatnou částí zprávy jsou návrhy koncepcí automatizace základních technologických částí, týkajících se spalovacího procesu v kotli.
[popis_orig] => Etapová zpráva se zbývá vyhodnocením a shrnutím poznatků z úprav, které byly doposud realizovány na spalovenském kotli ve spalovně SAKO Brno.
V další části jsou zpracovány časové průběhy vybraných provozních veličin s cílem získat podklady pro posouzení rezerv v provozu daných kotlů. Podstatnou částí zprávy jsou návrhy koncepcí automatizace základních technologických částí, týkajících se spalovacího procesu v kotli.
[klicova_slova] => Spalování odpadů, automatizace spalování, podávání paliva, primární vzduch, sekundární vzduch, rychlost válců roštu.
[klicova_slova_orig] => Spalování odpadů, automatizace spalování, podávání paliva, primární vzduch, sekundární vzduch, rychlost válců roštu.
[url] =>
[oecd_obor_id] => 10500
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => NĚMEC, Z.; SKÁLA, Z.; KOŇAŘÍK, M.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] => Etapová zpráva řešení projektu GAČR 101/02/0477
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Results with impact on practice
[druh_nazev] => Research report
[druh_popis] => Research report
[stav] => Approved
[vysledek_kategorie_id] => PX
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => NĚMEC, Z.; SKÁLA, Z.; KOŇAŘÍK, M. Návrh automatického řízení spalování u spalovenského kotle. VUT-FSI. Brno: 2002. 33 s.
[citace_html] => NĚMEC, Z.; SKÁLA, Z.; KOŇAŘÍK, M. Návrh automatického řízení spalování u spalovenského kotle. VUT-FSI. Brno: 2002. 33 s.
[citace_rtf] =>
[citace_bibtex] => @techreport{BUT56659,
author="Zdeněk {Němec} and Zdeněk {Skála} and Milan {Koňařík}",
title="Návrh automatického řízení spalování u spalovenského kotle",
year="2002",
address="Brno",
series="VUT-FSI",
edition="1",
pages="33"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10500
[oecd_tree_obor_nazev] => 1.5. Earth and related environmental sciences
[oecd_tree_podobor_id] =>
[oecd_tree_podobor_nazev] =>
[poznamka_metriky] =>
[nazev_en] => Control Structure of Waste Incineration Boiler
[popis_en] => The stage paper evaluates and summarizes adjustment knowledge, which had been realized in waste icineration boiler in the refuse icinerating plant SAKO Brno.
In the next part are assessed time behaviours of selected operating magnitudes. The goal was to get data for reserve assessment during boilers operation. The main part of paper are conception proposals of basic tecnological parts automatization concerning about combustion action in boiler.
[klicova_slova_en] => Waste combustion, automatization combustion, feed waste, prime air, sekondery air, speed cylinder fire grate.
[vysledek_datum] => 2002-12-01T00:00:00+01:00
)
[3] => Array
(
[vysledek_id] => 74301
[vysledek_druh_id] => ART
[ex_vysledek_id] => 94447
[vysledek_rok] => 2011
[nazev] => PRAVDĚPODOBNOSTNÍ PŘÍSTUPY K NAVIGACI MOBILNÍCH ROBOTŮ
[nazev_orig] => PRAVDĚPODOBNOSTNÍ PŘÍSTUPY K NAVIGACI MOBILNÍCH ROBOTŮ
[duvernost_udaju_id] => S
[popis] => Článek se zabývá problematikou zpracování neurčitosti při navigaci mobilních
robotů. Často se k tomuto účelu používají Markovské rozhodovací procesy. V článku je podán
přehled přístupů k řešení těchto procesů, přičemž podrobněji je popsána metoda
směrovaného dynamického programování a metoda založená na prohledávání AND/OR
grafu. Na závěr jsou prezentovány výsledky výpočetních experimentů, srovnávajících obě výše
uvedené metody.
[popis_orig] => Článek se zabývá problematikou zpracování neurčitosti při navigaci mobilních
robotů. Často se k tomuto účelu používají Markovské rozhodovací procesy. V článku je podán
přehled přístupů k řešení těchto procesů, přičemž podrobněji je popsána metoda
směrovaného dynamického programování a metoda založená na prohledávání AND/OR
grafu. Na závěr jsou prezentovány výsledky výpočetních experimentů, srovnávajících obě výše
uvedené metody.
[klicova_slova] => Navigace mobilních robotů, Markovské rozhodovací procesy
[klicova_slova_orig] => Navigace mobilních robotů, Markovské rozhodovací procesy
[url] =>
[oecd_obor_id] => 10103
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => JANČÍK, S.; DVOŘÁK, J.; STÁREK, I.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Peer-reviewed article not indexed in WoS or Scopus
[druh_popis] => Other original article or review in a peer-reviewed scientific periodical not included in WoS or Scopus
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 1210-8022
[identifikator_popis] => ISSN - Informační bulletin České statistické společnosti (CZ)
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => JANČÍK, S.; DVOŘÁK, J.; STÁREK, I. PRAVDĚPODOBNOSTNÍ PŘÍSTUPY K NAVIGACI MOBILNÍCH ROBOTŮ. Informační bulletin České statistické společnosti, 2011, roč. 22, č. 2, s. 63-70. ISSN: 1210-8022.
[citace_html] => JANČÍK, S.; DVOŘÁK, J.; STÁREK, I. PRAVDĚPODOBNOSTNÍ PŘÍSTUPY K NAVIGACI MOBILNÍCH ROBOTŮ. Informační bulletin České statistické společnosti, 2011, roč. 22, č. 2, s. 63-70. ISSN: 1210-8022.
[citace_rtf] =>
[citace_bibtex] => @article{BUT74301,
author="Stanislav {Jančík} and Jiří {Dvořák} and Ivo {Stárek}",
title="PRAVDĚPODOBNOSTNÍ PŘÍSTUPY K NAVIGACI MOBILNÍCH ROBOTŮ",
journal="Informační bulletin České statistické společnosti",
year="2011",
volume="22",
number="2",
pages="63--70",
issn="1210-8022"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10100
[oecd_tree_obor_nazev] => 1.1 Mathematics
[oecd_tree_podobor_id] => 10103
[oecd_tree_podobor_nazev] => Statistics and probability
[poznamka_metriky] =>
[nazev_en] => PROBABILISTIC APPROACHES TO MOBILE ROBOT NAVIGATION
[popis_en] => The paper deals with problems of handling uncertainty in mobile robot navigation.
These problems are often modeled by means of Markov decision processes. The paper makes
a survey of approaches to solving these processes, and in more detail describes the method of
focussed dynamic programming and a method based on AND/OR graph searching. The last
part of paper presents results of computational experiments comparing both above mentioned
methods.
[klicova_slova_en] => Mobile robot navigation, Markov decision processes
[vysledek_datum] => 2011-07-01T00:00:00+02:00
)
[4] => Array
(
[vysledek_id] => 74387
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 94514
[vysledek_rok] => 2011
[nazev] => Thermo diagnostics use for monitoring of the working environment parameters
[nazev_orig] => Thermo diagnostics use for monitoring of the working environment parameters
[duvernost_udaju_id] => S
[popis] => Nowadays it is relatively much paid attention to monitoring environmental parameters.
The thermal comfort occupies especially dominant position, which represents a number of important temperatures. This field can be understood as one of thermo diagnostic of application, since it is mostly for temperature monitoring.
[popis_orig] => Nowadays it is relatively much paid attention to monitoring environmental parameters.
The thermal comfort occupies especially dominant position, which represents a number of important temperatures. This field can be understood as one of thermo diagnostic of application, since it is mostly for temperature monitoring.
[klicova_slova] => Thermal comfort, thermo diagnostics, monitored temperature, contact measurement, non-contact measurement
[klicova_slova_orig] => Thermal comfort, thermo diagnostics, monitored temperature, contact measurement, non-contact measurement
[url] =>
[oecd_obor_id] => 20306
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] => Kompletní sborník konference na CD
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-553-0732-9
[identifikator_popis] => ISBN - Zborník XIV. medzinárodnej vedeckej konferencie DIS 2011
[riv_dodavka_id] => 4
[riv_dodavka_oznaceni] => RIV12-GA0-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J. Thermo diagnostics use for monitoring of the working environment parameters. In Zborník XIV. medzinárodnej vedeckej konferencie DIS 2011. DIS. Košice: Asociácia technických diagnostikov SR, 2011. p. P9_1 (P9_9 p.)ISBN: 978-80-553-0732-9.
[citace_html] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J. Thermo diagnostics use for monitoring of the working environment parameters. In Zborník XIV. medzinárodnej vedeckej konferencie DIS 2011. DIS. Košice: Asociácia technických diagnostikov SR, 2011. p. P9_1 (P9_9 p.)ISBN: 978-80-553-0732-9.
[citace_rtf] =>
[citace_bibtex] =>
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20306
[oecd_tree_podobor_nazev] => Audio engineering, reliability analysis
[poznamka_metriky] =>
[nazev_en] => Thermo diagnostics use for monitoring of the working environment parameters
[popis_en] => Nowadays it is relatively much paid attention to monitoring environmental parameters.
The thermal comfort occupies especially dominant position, which represents a number of important temperatures. This field can be understood as one of thermo diagnostic of application, since it is mostly for temperature monitoring.
[klicova_slova_en] => Thermal comfort, thermo diagnostics, monitored temperature, contact measurement, non-contact measurement
[vysledek_datum] => 2011-10-05T00:00:00+02:00
)
[5] => Array
(
[vysledek_id] => 74388
[vysledek_druh_id] => ART
[ex_vysledek_id] => 94515
[vysledek_rok] => 2011
[nazev] => Thermo diagnostics use for monitoring of the working environment parameters
[nazev_orig] => Thermo diagnostics use for monitoring of the working environment parameters
[duvernost_udaju_id] => S
[popis] => Nowadays it is relatively much paid attention to monitoring environmental parameters.
The thermal comfort occupies especially dominant position, which represents a number of important temperatures. This field can be understood as one of thermo diagnostic of application, since it is mostly for temperature monitoring.
[popis_orig] => Nowadays it is relatively much paid attention to monitoring environmental parameters.
The thermal comfort occupies especially dominant position, which represents a number of important temperatures. This field can be understood as one of thermo diagnostic of application, since it is mostly for temperature monitoring.
[klicova_slova] => Thermal comfort, thermo diagnostics, monitored temperature, contact measurement, non-contact measurement
[klicova_slova_orig] => Thermal comfort, thermo diagnostics, monitored temperature, contact measurement, non-contact measurement
[url] => http://www.atdsr.sk
[oecd_obor_id] => 20306
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Peer-reviewed article not indexed in WoS or Scopus
[druh_popis] => Other original article or review in a peer-reviewed scientific periodical not included in WoS or Scopus
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 1337-8252
[identifikator_popis] => ISSN - Spravodaj ATD SR (SK)
[riv_dodavka_id] => 4
[riv_dodavka_oznaceni] => RIV12-GA0-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J. Thermo diagnostics use for monitoring of the working environment parameters. Spravodaj ATD SR, 2011, vol. 2011, no. 1,2. 2011, p. 29-31. ISSN: 1337-8252.
[citace_html] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J. Thermo diagnostics use for monitoring of the working environment parameters. Spravodaj ATD SR, 2011, vol. 2011, no. 1,2. 2011, p. 29-31. ISSN: 1337-8252.
[citace_rtf] =>
[citace_bibtex] => @article{BUT74388,
author="Jana {Košíková} and František {Vdoleček} and Jan {Janečka}",
title="Thermo diagnostics use for monitoring of the working environment parameters",
journal="Spravodaj ATD SR",
year="2011",
volume="2011",
number="1,2. 2011",
pages="29--31",
issn="1337-8252",
url="http://www.atdsr.sk"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20306
[oecd_tree_podobor_nazev] => Audio engineering, reliability analysis
[poznamka_metriky] =>
[nazev_en] => Thermo diagnostics use for monitoring of the working environment parameters
[popis_en] => Nowadays it is relatively much paid attention to monitoring environmental parameters.
The thermal comfort occupies especially dominant position, which represents a number of important temperatures. This field can be understood as one of thermo diagnostic of application, since it is mostly for temperature monitoring.
[klicova_slova_en] => Thermal comfort, thermo diagnostics, monitored temperature, contact measurement, non-contact measurement
[vysledek_datum] => 2011-10-05T00:00:00+02:00
)
[6] => Array
(
[vysledek_id] => 74403
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 94530
[vysledek_rok] => 2011
[nazev] => Simulation Modelling and Control of Mechatronic Systems with Flexible Parts
[nazev_orig] => Simulation Modelling and Control of Mechatronic Systems with Flexible Parts
[duvernost_udaju_id] => S
[popis] => This paper deals with a simulation modelling of mechatronic systems with flexible parts. The presented approach can be used for a development of the mechatronic system which contains flexible parts. Deformations of these flexible parts affect behaviour of the whole mechatronic system. The flexible parts are included in the most of engineering applications and during a development cycle the behaviour of such parts is usually assumed as the behaviour of rigid parts and spring elements. The presented simulation modelling of the mechatronic system includes the behaviour of a multi-body system with the flexible parts using co-simulation techniques and it can be useful for a control design and a better prediction of the mechatronic system behaviour especially in systems where a deformation of flexible parts is significant for a correct operation of the system.
[popis_orig] => This paper deals with a simulation modelling of mechatronic systems with flexible parts. The presented approach can be used for a development of the mechatronic system which contains flexible parts. Deformations of these flexible parts affect behaviour of the whole mechatronic system. The flexible parts are included in the most of engineering applications and during a development cycle the behaviour of such parts is usually assumed as the behaviour of rigid parts and spring elements. The presented simulation modelling of the mechatronic system includes the behaviour of a multi-body system with the flexible parts using co-simulation techniques and it can be useful for a control design and a better prediction of the mechatronic system behaviour especially in systems where a deformation of flexible parts is significant for a correct operation of the system.
[klicova_slova] => Flexible Parts, Mechatronic Systems, Graig-Bampton method, Co-simulation,
[klicova_slova_orig] => Flexible Parts, Mechatronic Systems, Graig-Bampton method, Co-simulation,
[url] =>
[oecd_obor_id] => 20301
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z.; BŘEZINA, L.
[pocet_tvurcu] => 4
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-3-642-23243-5
[identifikator_popis] => ISBN - Mechatronics Recent Technological and Scientific Advances
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z.; BŘEZINA, L. Simulation Modelling and Control of Mechatronic Systems with Flexible Parts. In Mechatronics Recent Technological and Scientific Advances. Berlin: Springer, 2011. p. 569-578. ISBN: 978-3-642-23243-5.
[citace_html] => BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z.; BŘEZINA, L. Simulation Modelling and Control of Mechatronic Systems with Flexible Parts. In Mechatronics Recent Technological and Scientific Advances. Berlin: Springer, 2011. p. 569-578. ISBN: 978-3-642-23243-5.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT74403,
author="Tomáš {Březina} and Jan {Vetiška} and Zdeněk {Hadaš} and Lukáš {Březina}",
title="Simulation Modelling and Control of Mechatronic Systems with Flexible Parts",
booktitle="Mechatronics Recent Technological and Scientific Advances",
year="2011",
pages="569--578",
publisher="Springer",
address="Berlin",
isbn="978-3-642-23243-5"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20301
[oecd_tree_podobor_nazev] => Mechanical engineering
[poznamka_metriky] =>
[nazev_en] => Simulation Modelling and Control of Mechatronic Systems with Flexible Parts
[popis_en] => This paper deals with a simulation modelling of mechatronic systems with flexible parts. The presented approach can be used for a development of the mechatronic system which contains flexible parts. Deformations of these flexible parts affect behaviour of the whole mechatronic system. The flexible parts are included in the most of engineering applications and during a development cycle the behaviour of such parts is usually assumed as the behaviour of rigid parts and spring elements. The presented simulation modelling of the mechatronic system includes the behaviour of a multi-body system with the flexible parts using co-simulation techniques and it can be useful for a control design and a better prediction of the mechatronic system behaviour especially in systems where a deformation of flexible parts is significant for a correct operation of the system.
[klicova_slova_en] => Flexible Parts, Mechatronic Systems, Graig-Bampton method, Co-simulation,
[vysledek_datum] => 2011-09-21T00:00:00+02:00
)
[7] => Array
(
[vysledek_id] => 74659
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 94726
[vysledek_rok] => 2011
[nazev] => GA-Based Path Planning for Nonholonomic Mobile Robots
[nazev_orig] => GA-Based Path Planning for Nonholonomic Mobile Robots
[duvernost_udaju_id] => S
[popis] => In this paper, we deal with nonholonomic mobile robot path planning in a two-dimensional continuous space with known static polygonal obstacles. This problem involves finding a collision-free path from a start to a goal position, satisfying kinematic constraints and minimizing an evaluation function. The proposed approach consists of finding a path for a simplified nonholonomic robot by means of a genetic algorithm and subsequent adapting this path to remaining nonholonomic constraints by using a modified bi-directional A* algorithm. We compare this approach with methods based on A* and on rapidly exploring random trees.
[popis_orig] => In this paper, we deal with nonholonomic mobile robot path planning in a two-dimensional continuous space with known static polygonal obstacles. This problem involves finding a collision-free path from a start to a goal position, satisfying kinematic constraints and minimizing an evaluation function. The proposed approach consists of finding a path for a simplified nonholonomic robot by means of a genetic algorithm and subsequent adapting this path to remaining nonholonomic constraints by using a modified bi-directional A* algorithm. We compare this approach with methods based on A* and on rapidly exploring random trees.
[klicova_slova] => mobile robot, nonholonomic constraints, path planning, genetic algorithms, graph search algorithms, rapidly-exploring random trees
[klicova_slova_orig] => mobile robot, nonholonomic constraints, path planning, genetic algorithms, graph search algorithms, rapidly-exploring random trees
[url] =>
[oecd_obor_id] => 20204
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 1116
[schvaleno] => 2017-07-03
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => KRČEK, P.; DVOŘÁK, J.
[pocet_tvurcu] => 2
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-214-4302-0
[identifikator_popis] => ISBN - MENDEL 2011 - 17th International Conference on Soft Computing
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => KRČEK, P.; DVOŘÁK, J. GA-Based Path Planning for Nonholonomic Mobile Robots. In MENDEL 2011 - 17th International Conference on Soft Computing. Brno: Brno University of Technology, 2011. p. 552-559. ISBN: 978-80-214-4302-0.
[citace_html] => KRČEK, P.; DVOŘÁK, J. GA-Based Path Planning for Nonholonomic Mobile Robots. In MENDEL 2011 - 17th International Conference on Soft Computing. Brno: Brno University of Technology, 2011. p. 552-559. ISBN: 978-80-214-4302-0.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT74659,
author="Petr {Krček} and Jiří {Dvořák}",
title="GA-Based Path Planning for Nonholonomic Mobile Robots",
booktitle="MENDEL 2011 - 17th International Conference on Soft Computing",
year="2011",
pages="552--559",
publisher="Brno University of Technology",
address="Brno",
isbn="978-80-214-4302-0"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20200
[oecd_tree_obor_nazev] => 2.2 Electrical engineering, Electronic engineering, Information engineering
[oecd_tree_podobor_id] => 20204
[oecd_tree_podobor_nazev] => Robotics and automatic control
[poznamka_metriky] =>
[nazev_en] => GA-Based Path Planning for Nonholonomic Mobile Robots
[popis_en] => In this paper, we deal with nonholonomic mobile robot path planning in a two-dimensional continuous space with known static polygonal obstacles. This problem involves finding a collision-free path from a start to a goal position, satisfying kinematic constraints and minimizing an evaluation function. The proposed approach consists of finding a path for a simplified nonholonomic robot by means of a genetic algorithm and subsequent adapting this path to remaining nonholonomic constraints by using a modified bi-directional A* algorithm. We compare this approach with methods based on A* and on rapidly exploring random trees.
[klicova_slova_en] => mobile robot, nonholonomic constraints, path planning, genetic algorithms, graph search algorithms, rapidly-exploring random trees
[vysledek_datum] => 2011-06-15T00:00:00+02:00
)
[8] => Array
(
[vysledek_id] => 74732
[vysledek_druh_id] => VZ
[ex_vysledek_id] => 25550
[vysledek_rok] => 2011
[nazev] => Funkční vzor solárního panelu SOPLAN2
[nazev_orig] => Funkční vzor solárního panelu SOPLAN2
[duvernost_udaju_id] => S
[popis] => Funkční vzor je určen k testování parametrů nové konstrukce solárního panelu sendvičového uspořádání.
[popis_orig] => Funkční vzor je určen k testování parametrů nové konstrukce solárního panelu sendvičového uspořádání.
[klicova_slova] => solarní panel, energetika, sendvičové uspořádání
[klicova_slova_orig] => solarní panel, energetika, sendvičové uspořádání
[url] =>
[oecd_obor_id] => 20704
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => LACKO, B.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Applied results
[druh_nazev] => Functioning sample
[druh_popis] => Functioning sample
[stav] => Approved
[vysledek_kategorie_id] => AV
[vysledek_system_kategorie_id] => PD
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => LACKO, B.: Funkční vzor solárního panelu SOPLAN2. (Funkční vzorek)
[citace_html] => LACKO, B.: Funkční vzor solárního panelu SOPLAN2. (Funkční vzorek)
[citace_rtf] =>
[citace_bibtex] => @misc{BUT74732,
author="Branislav {Lacko}",
title="Funkční vzor solárního panelu SOPLAN2",
year="2011",
note="Functioning sample"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20700
[oecd_tree_obor_nazev] => 2.7 Environmental engineering
[oecd_tree_podobor_id] => 20704
[oecd_tree_podobor_nazev] => Energy and fuels
[poznamka_metriky] =>
[nazev_en] => Function model of solar panel
[popis_en] => The model is used for testing of prarameters of new design solar panel with sendvich realization.
[klicova_slova_en] => solar panel, energetics, sendvich design
[vysledek_datum] => 2011-12-16T00:00:00+01:00
)
[9] => Array
(
[vysledek_id] => 74750
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 94797
[vysledek_rok] => 2011
[nazev] => The Rule Based Path Planner for Autonomous Mobile Robot
[nazev_orig] => The Rule Based Path Planner for Autonomous Mobile Robot
[duvernost_udaju_id] => S
[popis] => The popularity of operating an autonomous robot in a populated environment increases in recent years. Presented paper describes a rule based state machine method used to successful navigation through highly populated environment. The paper includes the test results obtained by the real robot in a shopping mall representing the attractive example of such an environment.
[popis_orig] => The popularity of operating an autonomous robot in a populated environment increases in recent years. Presented paper describes a rule based state machine method used to successful navigation through highly populated environment. The paper includes the test results obtained by the real robot in a shopping mall representing the attractive example of such an environment.
[klicova_slova] => Path planning, motion planning, autonomous mobile robot, finite state machine.
[klicova_slova_orig] => Path planning, motion planning, autonomous mobile robot, finite state machine.
[url] =>
[oecd_obor_id] => 20204
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => VĚCHET, S.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-214-4302-0
[identifikator_popis] => ISBN - MENDEL 2011, 17th International Conference of Soft Computing
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => VĚCHET, S. The Rule Based Path Planner for Autonomous Mobile Robot. In MENDEL 2011, 17th International Conference of Soft Computing. Brno, Czech Republic: 2011. p. 546-551. ISBN: 978-80-214-4302-0.
[citace_html] => VĚCHET, S. The Rule Based Path Planner for Autonomous Mobile Robot. In MENDEL 2011, 17th International Conference of Soft Computing. Brno, Czech Republic: 2011. p. 546-551. ISBN: 978-80-214-4302-0.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT74750,
author="Stanislav {Věchet}",
title="The Rule Based Path Planner for Autonomous Mobile Robot",
booktitle="MENDEL 2011, 17th International Conference of Soft Computing",
year="2011",
pages="546--551",
address="Brno, Czech Republic",
isbn="978-80-214-4302-0"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20200
[oecd_tree_obor_nazev] => 2.2 Electrical engineering, Electronic engineering, Information engineering
[oecd_tree_podobor_id] => 20204
[oecd_tree_podobor_nazev] => Robotics and automatic control
[poznamka_metriky] =>
[nazev_en] => The Rule Based Path Planner for Autonomous Mobile Robot
[popis_en] => The popularity of operating an autonomous robot in a populated environment increases in recent years. Presented paper describes a rule based state machine method used to successful navigation through highly populated environment. The paper includes the test results obtained by the real robot in a shopping mall representing the attractive example of such an environment.
[klicova_slova_en] => Path planning, motion planning, autonomous mobile robot, finite state machine.
[vysledek_datum] => 2011-06-15T00:00:00+02:00
)
[10] => Array
(
[vysledek_id] => 74806
[vysledek_druh_id] => ART
[ex_vysledek_id] => 94834
[vysledek_rok] => 2011
[nazev] => Augmented reality usage for prototyping speed up
[nazev_orig] => Augmented reality usage for prototyping speed up
[duvernost_udaju_id] => S
[popis] => The integral part of production process in many companies is prototyping. Although, these compa- nies commonly have high quality visualization tools (large screen projections, virtual reality), proto- typing was never abandoned. There is a number of reasons. The most important is the possibility of model observation from any angle without any physical constraints and its haptic feedback. The in- teractivity of model adjustments is important as well. The direct work with the model allows the de- signers to focus on the creative process more than work with a computer. There is still a problem with a difficult adjustability of the model. More significant changes demand completely new prototype or at least longer time for its realization.
[popis_orig] => The integral part of production process in many companies is prototyping. Although, these compa- nies commonly have high quality visualization tools (large screen projections, virtual reality), proto- typing was never abandoned. There is a number of reasons. The most important is the possibility of model observation from any angle without any physical constraints and its haptic feedback. The in- teractivity of model adjustments is important as well. The direct work with the model allows the de- signers to focus on the creative process more than work with a computer. There is still a problem with a difficult adjustability of the model. More significant changes demand completely new prototype or at least longer time for its realization.
[klicova_slova] => augmented reality, pose estimation
[klicova_slova_orig] => augmented reality, pose estimation
[url] =>
[oecd_obor_id] => 20204
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Institute of Automation and Computer Science
[odpovedny_utvar_zkratka] => IACS
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ŠŤASTNÝ, J.; PROCHÁZKA, D.
[pocet_tvurcu] => 4
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Peer-reviewed article not indexed in WoS or Scopus
[druh_popis] => Other original article or review in a peer-reviewed scientific periodical not included in WoS or Scopus
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 1211-8516
[identifikator_popis] => ISSN - Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis (CZ)
[riv_dodavka_id] => 24
[riv_dodavka_oznaceni] => RIV12-MSM-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ŠŤASTNÝ, J.; PROCHÁZKA, D. Augmented reality usage for prototyping speed up. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2011, vol. 2011, no. 2, p. 353-360. ISSN: 1211-8516.
[citace_html] => ŠŤASTNÝ, J.; PROCHÁZKA, D. Augmented reality usage for prototyping speed up. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2011, vol. 2011, no. 2, p. 353-360. ISSN: 1211-8516.
[citace_rtf] =>
[citace_bibtex] => @article{BUT74806,
author="Jiří {Šťastný} and David {Procházka}",
title="Augmented reality usage for prototyping speed up",
journal="Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis",
year="2011",
volume="2011",
number="2",
pages="353--360",
issn="1211-8516"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20200
[oecd_tree_obor_nazev] => 2.2 Electrical engineering, Electronic engineering, Information engineering
[oecd_tree_podobor_id] => 20204
[oecd_tree_podobor_nazev] => Robotics and automatic control
[poznamka_metriky] =>
[nazev_en] => Augmented reality usage for prototyping speed up
[popis_en] => The integral part of production process in many companies is prototyping. Although, these compa- nies commonly have high quality visualization tools (large screen projections, virtual reality), proto- typing was never abandoned. There is a number of reasons. The most important is the possibility of model observation from any angle without any physical constraints and its haptic feedback. The in- teractivity of model adjustments is important as well. The direct work with the model allows the de- signers to focus on the creative process more than work with a computer. There is still a problem with a difficult adjustability of the model. More significant changes demand completely new prototype or at least longer time for its realization.
[klicova_slova_en] => augmented reality, pose estimation
[vysledek_datum] => 2011-01-01T00:00:00+01:00
)
)
)
Array
(
[total] => 2086
[page] => 101
[count] => 11
[n_pages] => 140
[pagelen] => 15
[odkaz] => typVysledku=&rok=&ftext=&btnSubmit=1
[base_detail] => /en/veda/publikace/detail/
[base_page] => /en/veda/publikace
[vysledek] => Array
(
[0] => Array
(
[quotations] => ANDRŠ, O.; BŘEZINA, T.; KOVÁŘ, J.
[title] => Design of fuzzy logic controller for DC motor
[typ] => PV
[year] => 2011
[id_vav] => 73751
)
[1] => Array
(
[quotations] => VĚCHET, S.
[title] => Experimentální bezdrátový snímač vibrací
[typ] => AV
[year] => 2007
[id_vav] => 69246
)
[2] => Array
(
[quotations] => NĚMEC, Z.; SKÁLA, Z.; KOŇAŘÍK, M.
[title] => Návrh automatického řízení spalování u spalovenského kotle
[typ] => PX
[year] => 2002
[id_vav] => 56659
)
[3] => Array
(
[quotations] => JANČÍK, S.; DVOŘÁK, J.; STÁREK, I.
[title] => PRAVDĚPODOBNOSTNÍ PŘÍSTUPY K NAVIGACI MOBILNÍCH ROBOTŮ
[typ] => PV
[year] => 2011
[id_vav] => 74301
)
[4] => Array
(
[quotations] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J.
[title] => Thermo diagnostics use for monitoring of the working environment parameters
[typ] => PV
[year] => 2011
[id_vav] => 74387
)
[5] => Array
(
[quotations] => KOŠÍKOVÁ, J.; VDOLEČEK, F.; JANEČKA, J.
[title] => Thermo diagnostics use for monitoring of the working environment parameters
[typ] => PV
[year] => 2011
[id_vav] => 74388
)
[6] => Array
(
[quotations] => BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z.; BŘEZINA, L.
[title] => Simulation Modelling and Control of Mechatronic Systems with Flexible Parts
[typ] => PV
[year] => 2011
[id_vav] => 74403
)
[7] => Array
(
[quotations] => KRČEK, P.; DVOŘÁK, J.
[title] => GA-Based Path Planning for Nonholonomic Mobile Robots
[typ] => PV
[year] => 2011
[id_vav] => 74659
)
[8] => Array
(
[quotations] => LACKO, B.
[title] => Funkční vzor solárního panelu SOPLAN2
[typ] => AV
[year] => 2011
[id_vav] => 74732
)
[9] => Array
(
[quotations] => VĚCHET, S.
[title] => The Rule Based Path Planner for Autonomous Mobile Robot
[typ] => PV
[year] => 2011
[id_vav] => 74750
)
[10] => Array
(
[quotations] => ŠŤASTNÝ, J.; PROCHÁZKA, D.
[title] => Augmented reality usage for prototyping speed up
[typ] => PV
[year] => 2011
[id_vav] => 74806
)
)
)