Array
(
[page] => 234
[item_count] => 3612
[items_per_page] => 15
[data] => Array
(
[0] => Array
(
[vysledek_id] => 26818
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 74837
[vysledek_rok] => 2008
[nazev] => NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM
[nazev_orig] => NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM
[duvernost_udaju_id] => S
[popis] => This contribution is focused on the analysis of dynamic behaviour of fluid - elastic structure interaction. A blade vibration of centrifugal pump or water turbine in liquid can be typical technical applications and other hydraulic machines. Solution using commercial software packages is very difficult and time consuming. In this contribution is presented new mathematical and computational model of assemblage the local FEM matrices of added liquid affects. This solution is based on the assumption the solution to series expansion of finite number of eigen shape of vibration.
[popis_orig] => This contribution is focused on the analysis of dynamic behaviour of fluid - elastic structure interaction. A blade vibration of centrifugal pump or water turbine in liquid can be typical technical applications and other hydraulic machines. Solution using commercial software packages is very difficult and time consuming. In this contribution is presented new mathematical and computational model of assemblage the local FEM matrices of added liquid affects. This solution is based on the assumption the solution to series expansion of finite number of eigen shape of vibration.
[klicova_slova] => Fluid - structure interaction, finite element method, added mass, added damping, computational model
[klicova_slova_orig] => Fluid - structure interaction, finite element method, added mass, added damping, computational model
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 1799
[schvaleno] => 2019-03-19
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; MALENOVSKÝ, E.
[pocet_tvurcu] => 2
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 80-87012-12-7
[identifikator_popis] => ISBN - FIV 2008 - FLOW-INDUCED VIBRATION
[riv_dodavka_id] => 86
[riv_dodavka_oznaceni] => RIV10-GA0-26210___
[riv_dodavka_rok] => 2010
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; MALENOVSKÝ, E. NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM. In FIV 2008 - FLOW-INDUCED VIBRATION. Prague: Institute of Thermomechanics, AS CR, v.v.i., 2008. p. 103-108. ISBN: 80-87012-12-7.
[citace_html] => POCHYLÝ, F.; MALENOVSKÝ, E. NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM. In FIV 2008 - FLOW-INDUCED VIBRATION. Prague: Institute of Thermomechanics, AS CR, v.v.i., 2008. p. 103-108. ISBN: 80-87012-12-7.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT26818,
author="František {Pochylý} and Eduard {Malenovský}",
title="NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM",
booktitle="FIV 2008 - FLOW-INDUCED VIBRATION",
year="2008",
number="1",
pages="103--108",
publisher="Institute of Thermomechanics, AS CR, v.v.i.",
address="Prague",
isbn="80-87012-12-7"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM
[popis_en] => This contribution is focused on the analysis of dynamic behaviour of fluid - elastic structure interaction. A blade vibration of centrifugal pump or water turbine in liquid can be typical technical applications and other hydraulic machines. Solution using commercial software packages is very difficult and time consuming. In this contribution is presented new mathematical and computational model of assemblage the local FEM matrices of added liquid affects. This solution is based on the assumption the solution to series expansion of finite number of eigen shape of vibration.
[klicova_slova_en] => Fluid - structure interaction, finite element method, added mass, added damping, computational model
[vysledek_datum] => 2008-06-30T00:00:00+02:00
)
[1] => Array
(
[vysledek_id] => 47214
[vysledek_druh_id] => ART
[ex_vysledek_id] => 78482
[vysledek_rok] => 2008
[nazev] => New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid.
[nazev_orig] => New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid.
[duvernost_udaju_id] => S
[popis] => This contribution is focused on the analysis if dynamic behavior of elastic continuum moving in liquid. The method solution is demonstrated on the non-stationary movement of a bar in a real, incompressible liquid. The principle of the solution is based on the modal transformation of the bar and discrete process using the finite element method. The problem is in general non-linear. However, the method introduced in this contribution allows the solution of the problem in time steps. The solution is based upon a certain substitution which provides gradual separation of the movement of liquid and the movement of the bar. This substitution is entered analogously on the finite element and is dependent on the normal coordinates. The result is a tensor of additional effects.
[popis_orig] => This contribution is focused on the analysis if dynamic behavior of elastic continuum moving in liquid. The method solution is demonstrated on the non-stationary movement of a bar in a real, incompressible liquid. The principle of the solution is based on the modal transformation of the bar and discrete process using the finite element method. The problem is in general non-linear. However, the method introduced in this contribution allows the solution of the problem in time steps. The solution is based upon a certain substitution which provides gradual separation of the movement of liquid and the movement of the bar. This substitution is entered analogously on the finite element and is dependent on the normal coordinates. The result is a tensor of additional effects.
[klicova_slova] => free damped vibration, real liquid, interaction of continuum with liguid, finite element
[klicova_slova_orig] => free damped vibration, real liquid, interaction of continuum with liguid, finite element
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2010-12-03
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; MALENOVSKÝ, E.
[pocet_tvurcu] => 2
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Peer-reviewed article not indexed in WoS or Scopus
[druh_popis] => Other original article or review in a peer-reviewed scientific periodical not included in WoS or Scopus
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 1802-1484
[identifikator_popis] => ISSN - Engineering Mechanics (CZ)
[riv_dodavka_id] => 86
[riv_dodavka_oznaceni] => RIV10-GA0-26210___
[riv_dodavka_rok] => 2010
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; MALENOVSKÝ, E. New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid. Engineering Mechanics, 2008, vol. 15, no. 6, p. 411-418. ISSN: 1802-1484.
[citace_html] => POCHYLÝ, F.; MALENOVSKÝ, E. New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid. Engineering Mechanics, 2008, vol. 15, no. 6, p. 411-418. ISSN: 1802-1484.
[citace_rtf] =>
[citace_bibtex] => @article{BUT47214,
author="František {Pochylý} and Eduard {Malenovský}",
title="New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid.",
journal="Engineering Mechanics",
year="2008",
volume="15",
number="6",
pages="411--418",
issn="1802-1484"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid.
[popis_en] => This contribution is focused on the analysis if dynamic behavior of elastic continuum moving in liquid. The method solution is demonstrated on the non-stationary movement of a bar in a real, incompressible liquid. The principle of the solution is based on the modal transformation of the bar and discrete process using the finite element method. The problem is in general non-linear. However, the method introduced in this contribution allows the solution of the problem in time steps. The solution is based upon a certain substitution which provides gradual separation of the movement of liquid and the movement of the bar. This substitution is entered analogously on the finite element and is dependent on the normal coordinates. The result is a tensor of additional effects.
[klicova_slova_en] => free damped vibration, real liquid, interaction of continuum with liguid, finite element
[vysledek_datum] => 2008-12-08T00:00:00+01:00
)
[2] => Array
(
[vysledek_id] => 48412
[vysledek_druh_id] => ART
[ex_vysledek_id] => 75957
[vysledek_rok] => 2008
[nazev] => NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID
[nazev_orig] => NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID
[duvernost_udaju_id] => S
[popis] => This contribution is focused on the analysis of dynamic behavior of elastic body moving in liquid. In many technical applications this motion is with large displacements. Some technical applications can be vibration of blades or rotors in centrifugal pumps or water turbines. But on other hand presented approach has more general application. Because of are assumed the large displacements, this analysis is nonlinear and modal behavior depends on a parameters. There is very difficult or impossible to do this analysis using commercial programme systems. It is caused by limited number of boundary conditions for contact between body and liquid in these systems. In this contribution is presented the mathematical model of a new type of boundary conditions which allowed the modal analysis and computing the steady state response. In principle this analysis is if the frequency domain. It is necessary provided some testing, because this approach is new. For this case, the curvilinear co-ordinates were chosen. The Bézier body was chosen for the description of geometrical configuration and also for approximation the solution. MATLAB programme code was chosen for software processing
[popis_orig] => This contribution is focused on the analysis of dynamic behavior of elastic body moving in liquid. In many technical applications this motion is with large displacements. Some technical applications can be vibration of blades or rotors in centrifugal pumps or water turbines. But on other hand presented approach has more general application. Because of are assumed the large displacements, this analysis is nonlinear and modal behavior depends on a parameters. There is very difficult or impossible to do this analysis using commercial programme systems. It is caused by limited number of boundary conditions for contact between body and liquid in these systems. In this contribution is presented the mathematical model of a new type of boundary conditions which allowed the modal analysis and computing the steady state response. In principle this analysis is if the frequency domain. It is necessary provided some testing, because this approach is new. For this case, the curvilinear co-ordinates were chosen. The Bézier body was chosen for the description of geometrical configuration and also for approximation the solution. MATLAB programme code was chosen for software processing
[klicova_slova] => Fluid structure interaction, finite element method, added mass, added damping, experimental analysis
[klicova_slova_orig] => Fluid structure interaction, finite element method, added mass, added damping, experimental analysis
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2010-12-03
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; MALENOVSKÝ, E.
[pocet_tvurcu] => 2
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Peer-reviewed article not indexed in WoS or Scopus
[druh_popis] => Other original article or review in a peer-reviewed scientific periodical not included in WoS or Scopus
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 1335-2393
[identifikator_popis] => ISSN - Acta Mechanica Slovaca (SK)
[riv_dodavka_id] => 86
[riv_dodavka_oznaceni] => RIV10-GA0-26210___
[riv_dodavka_rok] => 2010
[diagnostika_pocet] => 2
[diagnostika_pocet_chyba] => 2
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; MALENOVSKÝ, E. NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID. Acta Mechanica Slovaca, 2008, vol. 12, no. 1, p. 663-676. ISSN: 1335-2393.
[citace_html] => POCHYLÝ, F.; MALENOVSKÝ, E. NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID. Acta Mechanica Slovaca, 2008, vol. 12, no. 1, p. 663-676. ISSN: 1335-2393.
[citace_rtf] =>
[citace_bibtex] => @article{BUT48412,
author="František {Pochylý} and Eduard {Malenovský}",
title="NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID",
journal="Acta Mechanica Slovaca",
year="2008",
volume="12",
number="1",
pages="663--676",
issn="1335-2393"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID
[popis_en] => This contribution is focused on the analysis of dynamic behavior of elastic body moving in liquid. In many technical applications this motion is with large displacements. Some technical applications can be vibration of blades or rotors in centrifugal pumps or water turbines. But on other hand presented approach has more general application. Because of are assumed the large displacements, this analysis is nonlinear and modal behavior depends on a parameters. There is very difficult or impossible to do this analysis using commercial programme systems. It is caused by limited number of boundary conditions for contact between body and liquid in these systems. In this contribution is presented the mathematical model of a new type of boundary conditions which allowed the modal analysis and computing the steady state response. In principle this analysis is if the frequency domain. It is necessary provided some testing, because this approach is new. For this case, the curvilinear co-ordinates were chosen. The Bézier body was chosen for the description of geometrical configuration and also for approximation the solution. MATLAB programme code was chosen for software processing
[klicova_slova_en] => Fluid structure interaction, finite element method, added mass, added damping, experimental analysis
[vysledek_datum] => 2008-10-14T00:00:00+02:00
)
[3] => Array
(
[vysledek_id] => 65924
[vysledek_druh_id] => NEWS
[ex_vysledek_id] => 71250
[vysledek_rok] => 2007
[nazev] => Přídavné účinky tekutiny působící na tuhé těleso s uvažováním vlivu teploty
[nazev_orig] => Přídavné účinky tekutiny působící na tuhé těleso s uvažováním vlivu teploty
[duvernost_udaju_id] => U
[popis] => První část práce uvádí matematický model nestacionárního pohybu tuhého tělesa s účinky kapaliny a teploty. V další části práce je provedeno zjednodušené řešení pro konstantní teplotu, neboť její vliv je možno zahrnout ve změně viskozity. V poslední části práce jsou uvedeny příklady, zaměřené na stanovení přídavných účinků tekutiny na píst a ventil plunžrového čerpadla.
[popis_orig] => První část práce uvádí matematický model nestacionárního pohybu tuhého tělesa s účinky kapaliny a teploty. V další části práce je provedeno zjednodušené řešení pro konstantní teplotu, neboť její vliv je možno zahrnout ve změně viskozity. V poslední části práce jsou uvedeny příklady, zaměřené na stanovení přídavných účinků tekutiny na píst a ventil plunžrového čerpadla.
[klicova_slova] => plunžrové čerpadlo, matematický model
[klicova_slova_orig] => plunžrové čerpadlo, matematický model
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] =>
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; KOZUBKOVÁ, M.; MALENOVSKÝ, E.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Other
[druh_nazev] => Report
[druh_popis] =>
[stav] => Approved
[vysledek_kategorie_id] => OS
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; KOZUBKOVÁ, M.; MALENOVSKÝ, E. Přídavné účinky tekutiny působící na tuhé těleso s uvažováním vlivu teploty. VUT v Brně, FSI: 2007. s. 1-31.
[citace_html] => POCHYLÝ, F.; KOZUBKOVÁ, M.; MALENOVSKÝ, E. Přídavné účinky tekutiny působící na tuhé těleso s uvažováním vlivu teploty. VUT v Brně, FSI: 2007. s. 1-31.
[citace_rtf] =>
[citace_bibtex] => @misc{BUT65924,
author="František {Pochylý} and Milada {Kozubková} and Eduard {Malenovský}",
title="Přídavné účinky tekutiny působící na tuhé těleso s uvažováním vlivu teploty",
year="2007",
pages="1--31",
address="VUT v Brně, FSI"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => Added mass effect of fluid on rigid body with influence of the fluid temperature
[popis_en] => First part of the report introduces mathematical model of unsteady motion of rigid body with effects of liquid and temperature. Other part presents simplified solution for constant temperature, because its influence can be included into viscosity variations. Last part mentions examples of assessment of added mass effect on piston and valve of plunger pump.
[klicova_slova_en] => plunger pump, mathematical model
[vysledek_datum] => 2007-12-18T00:00:00+01:00
)
[4] => Array
(
[vysledek_id] => 65929
[vysledek_druh_id] => NEWS
[ex_vysledek_id] => 64369
[vysledek_rok] => 2006
[nazev] => Přídavné účinky tekutiny, působící na píst pístového čerpadla
[nazev_orig] => Přídavné účinky tekutiny, působící na píst pístového čerpadla
[duvernost_udaju_id] => U
[popis] => Zpráva obsahuje matematický model pístového čerpadla, který řeší přídavné účinky tekutiny na píst. Model je založen na řešení Navier-Stokesových rovnic s předpokladem velkých deformací hranice (pohyb pístu). Autoři využívají znalosti křivočarých souřadnic a Bézierova těles.
[popis_orig] => Zpráva obsahuje matematický model pístového čerpadla, který řeší přídavné účinky tekutiny na píst. Model je založen na řešení Navier-Stokesových rovnic s předpokladem velkých deformací hranice (pohyb pístu). Autoři využívají znalosti křivočarých souřadnic a Bézierova těles.
[klicova_slova] =>
[klicova_slova_orig] =>
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] =>
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; HABÁN, V.; MALENOVSKÝ, E.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Other
[druh_nazev] => Report
[druh_popis] =>
[stav] => Approved
[vysledek_kategorie_id] => OS
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; HABÁN, V.; MALENOVSKÝ, E. Přídavné účinky tekutiny, působící na píst pístového čerpadla. VUT Brno FSI, Odbor fluidního inženýrství V. Kaplana: Hydrosystem project, a.s. Olomouc, 2006. s. 1-14.
[citace_html] => POCHYLÝ, F.; HABÁN, V.; MALENOVSKÝ, E. Přídavné účinky tekutiny, působící na píst pístového čerpadla. VUT Brno FSI, Odbor fluidního inženýrství V. Kaplana: Hydrosystem project, a.s. Olomouc, 2006. s. 1-14.
[citace_rtf] =>
[citace_bibtex] => @misc{BUT65929,
author="František {Pochylý} and Vladimír {Habán} and Eduard {Malenovský}",
title="Přídavné účinky tekutiny, působící na píst pístového čerpadla",
year="2006",
pages="1--14",
publisher="Hydrosystem project, a.s. Olomouc",
address="VUT Brno FSI, Odbor fluidního inženýrství V. Kaplana"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => The additive effect of a liquid to the piston
[popis_en] => The proposed report describes a mathematical model of a piston pump that solves the additive effect of a liquid to the piston. This model is based on solution of Navier Stokes equation. A big deformation of boundaries (the piston movement) is assumed. The authors used the curvilinear coordinates and a Bezier body.
[klicova_slova_en] => mathematical model, piston pump
[vysledek_datum] => 2006-12-01T00:00:00+01:00
)
[5] => Array
(
[vysledek_id] => 65973
[vysledek_druh_id] => NEWS
[ex_vysledek_id] => 66498
[vysledek_rok] => 2005
[nazev] => Přídavné účinky kapaliny, působící na píst objemového čerpadla.
[nazev_orig] => Přídavné účinky kapaliny, působící na píst objemového čerpadla.
[duvernost_udaju_id] => U
[popis] => Zpráva uvádí metodiku výpočtu tenzorů přídavných účinků kapaliny na tuhé těleso, při jeho translačním pohybu.
[popis_orig] => Zpráva uvádí metodiku výpočtu tenzorů přídavných účinků kapaliny na tuhé těleso, při jeho translačním pohybu.
[klicova_slova] =>
[klicova_slova_orig] =>
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] =>
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; MALENOVSKÝ, E.; HABÁN, V.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Other
[druh_nazev] => Report
[druh_popis] =>
[stav] => Approved
[vysledek_kategorie_id] => OS
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; MALENOVSKÝ, E.; HABÁN, V. Přídavné účinky kapaliny, působící na píst objemového čerpadla. VUT v Brně, FSI: Hydrosystem project, a.s. Olomouc, 2005. 31 s.
[citace_html] => POCHYLÝ, F.; MALENOVSKÝ, E.; HABÁN, V. Přídavné účinky kapaliny, působící na píst objemového čerpadla. VUT v Brně, FSI: Hydrosystem project, a.s. Olomouc, 2005. 31 s.
[citace_rtf] =>
[citace_bibtex] => @misc{BUT65973,
author="František {Pochylý} and Eduard {Malenovský} and Vladimír {Habán}",
title="Přídavné účinky kapaliny, působící na píst objemového čerpadla.",
year="2005",
pages="31",
publisher="Hydrosystem project, a.s. Olomouc",
address="VUT v Brně, FSI"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => The liquid additive effects to the displacement pump piston.
[popis_en] => The report presents the tensors of the liquid additive effects to the solid body in its translational movement.
[klicova_slova_en] => the additive mass tensor, incompressible liquid, piston pump, solid body
[vysledek_datum] => 2005-12-30T00:00:00+01:00
)
[6] => Array
(
[vysledek_id] => 72796
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 93184
[vysledek_rok] => 2011
[nazev] => influence of eccentricity of the axial flow in leakage joints
[nazev_orig] => influence of eccentricity of the axial flow in leakage joints
[duvernost_udaju_id] => S
[popis] => This article is concerned with comparison of velocity field size depending on size of the eccentricity in leakage joints of centrifugal pumps. Eccentricity is created by gravitation and radial force from impeller. This report describes approach for calculating the straight seal without rotation. An eccenticity dependence of the axial velocity field in the article is numerically verified by using FLUENT software.
[popis_orig] => This article is concerned with comparison of velocity field size depending on size of the eccentricity in leakage joints of centrifugal pumps. Eccentricity is created by gravitation and radial force from impeller. This report describes approach for calculating the straight seal without rotation. An eccenticity dependence of the axial velocity field in the article is numerically verified by using FLUENT software.
[klicova_slova] => leakage joint, seal, velocity field, centrifugal pumps, eccentricity
[klicova_slova_orig] => leakage joint, seal, velocity field, centrifugal pumps, eccentricity
[url] =>
[oecd_obor_id] => 10305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2012-05-14
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => KUBIS, A.; NAVRÁTIL, P.
[pocet_tvurcu] => 2
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-87012-33-8
[identifikator_popis] => ISBN - ENGINEERING MECHANICS 2011, 17th Internacional Conference
[riv_dodavka_id] => 18
[riv_dodavka_oznaceni] => RIV12-MPO-26210___
[riv_dodavka_rok] => 2012
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => KUBIS, A.; NAVRÁTIL, P. influence of eccentricity of the axial flow in leakage joints. In ENGINEERING MECHANICS 2011, 17th Internacional Conference. 1. Prague: Institute of thermomechanics, 2011. p. 343-346. ISBN: 978-80-87012-33-8.
[citace_html] => KUBIS, A.; NAVRÁTIL, P. influence of eccentricity of the axial flow in leakage joints. In ENGINEERING MECHANICS 2011, 17th Internacional Conference. 1. Prague: Institute of thermomechanics, 2011. p. 343-346. ISBN: 978-80-87012-33-8.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT72796,
author="Aleš {Kubis} and Petr {Navrátil}",
title="influence of eccentricity of the axial flow in leakage joints",
booktitle="ENGINEERING MECHANICS 2011, 17th Internacional Conference",
year="2011",
series="1",
number="2011",
pages="343--346",
publisher="Institute of thermomechanics",
address="Prague",
isbn="978-80-87012-33-8"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10300
[oecd_tree_obor_nazev] => 1.3 Physical sciences
[oecd_tree_podobor_id] => 10305
[oecd_tree_podobor_nazev] => Fluids and plasma physics (including surface physics)
[poznamka_metriky] =>
[nazev_en] => influence of eccentricity of the axial flow in leakage joints
[popis_en] => This article is concerned with comparison of velocity field size depending on size of the eccentricity in leakage joints of centrifugal pumps. Eccentricity is created by gravitation and radial force from impeller. This report describes approach for calculating the straight seal without rotation. An eccenticity dependence of the axial velocity field in the article is numerically verified by using FLUENT software.
[klicova_slova_en] => leakage joint, seal, velocity field, centrifugal pumps, eccentricity
[vysledek_datum] => 2011-05-09T00:00:00+02:00
)
[7] => Array
(
[vysledek_id] => 92938
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 99080
[vysledek_rok] => 2012
[nazev] => Bearing with magnetic fluid and hydrophobic surface of the lining
[nazev_orig] => Bearing with magnetic fluid and hydrophobic surface of the lining
[duvernost_udaju_id] => S
[popis] => This work focuses on the setting of the stiffness and damping matrix of the long cylindrical bearing. Additional effects of the electrically conductive fluids are determined on the magnetic induction dependence. The new boundary conditions are used, which express the effect of the adhesion forces between the liquid and the solid surface. The boundary condition allows the definition of the transition from a hydrophobic surface to the hydrophilic one.
[popis_orig] => This work focuses on the setting of the stiffness and damping matrix of the long cylindrical bearing. Additional effects of the electrically conductive fluids are determined on the magnetic induction dependence. The new boundary conditions are used, which express the effect of the adhesion forces between the liquid and the solid surface. The boundary condition allows the definition of the transition from a hydrophobic surface to the hydrophilic one.
[klicova_slova] => dynamic viscosity, magnetic fluid
[klicova_slova_orig] => dynamic viscosity, magnetic fluid
[url] =>
[oecd_obor_id] => 20704
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 604
[schvaleno] => 2016-03-21
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; FIALOVÁ, S.; MALENOVSKÝ, E.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] => 10.1088/1755-1315/15/2/022012
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 1755-1307
[identifikator_popis] => ISSN - IOP Conference Series: Earth and Environmental Science (GB)
[riv_dodavka_id] => 186
[riv_dodavka_oznaceni] => RIV13-GA0-26210___
[riv_dodavka_rok] => 2013
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; FIALOVÁ, S.; MALENOVSKÝ, E. Bearing with magnetic fluid and hydrophobic surface of the lining. In OP Conference Series-Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. BRISTOL BS1 6BE, ENGLAND: IOP PUBLISHING LTD, DIRAC HOUSE, TEMPLE BACK, 2012. no. 2, p. 1-9. ISSN: 1755-1307.
[citace_html] => POCHYLÝ, F.; FIALOVÁ, S.; MALENOVSKÝ, E. Bearing with magnetic fluid and hydrophobic surface of the lining. In OP Conference Series-Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. BRISTOL BS1 6BE, ENGLAND: IOP PUBLISHING LTD, DIRAC HOUSE, TEMPLE BACK, 2012. no. 2, p. 1-9. ISSN: 1755-1307.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT92938,
author="František {Pochylý} and Simona {Fialová} and Eduard {Malenovský}",
title="Bearing with magnetic fluid and hydrophobic surface of the lining",
booktitle="OP Conference Series-Earth and Environmental Science",
year="2012",
journal="IOP Conference Series: Earth and Environmental Science",
volume="15",
number="2",
pages="1--9",
publisher="IOP PUBLISHING LTD, DIRAC HOUSE, TEMPLE BACK,",
address="BRISTOL BS1 6BE, ENGLAND",
doi="10.1088/1755-1315/15/2/022012",
issn="1755-1307"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20700
[oecd_tree_obor_nazev] => 2.7 Environmental engineering
[oecd_tree_podobor_id] => 20704
[oecd_tree_podobor_nazev] => Energy and fuels
[poznamka_metriky] =>
[nazev_en] => Bearing with magnetic fluid and hydrophobic surface of the lining
[popis_en] => This work focuses on the setting of the stiffness and damping matrix of the long cylindrical bearing. Additional effects of the electrically conductive fluids are determined on the magnetic induction dependence. The new boundary conditions are used, which express the effect of the adhesion forces between the liquid and the solid surface. The boundary condition allows the definition of the transition from a hydrophobic surface to the hydrophilic one.
[klicova_slova_en] => dynamic viscosity, magnetic fluid
[vysledek_datum] => 2012-09-19T00:00:00+02:00
)
[8] => Array
(
[vysledek_id] => 96903
[vysledek_druh_id] => ART
[ex_vysledek_id] => 101741
[vysledek_rok] => 2013
[nazev] => New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses.
[nazev_orig] => New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses.
[duvernost_udaju_id] => S
[popis] => This report focuses on an analysis of the dynamic behaviour of a fluid–structure interaction system. This analysis is nonlinear, and the modal behaviour depends on many parameters, because large displacements are assumed. Technical applications include vibration of blades of rotational centrifugal pumps or water turbines. A new mathematical model of a boundary condition that allow for modal analysis and calculation of the steady state or unsteady state responses is presented in this article. This condition is based on a special convolutory integral for fluid velocity and pressure and their expansion into a series of eigenmodes of structure vibration. This approach allows for the separation of the structure and the fluid. A comparison between the computational and the experimental analyses is presented. Curvilinear coordinates and a Bézier body were chosen for the description of the geometrical configuration and the approximation of the solution.
[popis_orig] => This report focuses on an analysis of the dynamic behaviour of a fluid–structure interaction system. This analysis is nonlinear, and the modal behaviour depends on many parameters, because large displacements are assumed. Technical applications include vibration of blades of rotational centrifugal pumps or water turbines. A new mathematical model of a boundary condition that allow for modal analysis and calculation of the steady state or unsteady state responses is presented in this article. This condition is based on a special convolutory integral for fluid velocity and pressure and their expansion into a series of eigenmodes of structure vibration. This approach allows for the separation of the structure and the fluid. A comparison between the computational and the experimental analyses is presented. Curvilinear coordinates and a Bézier body were chosen for the description of the geometrical configuration and the approximation of the solution.
[klicova_slova] => Fluid–structure interaction; Finite element method; Experimental analysis; Addition mass; Damping; Stiffness
[klicova_slova_orig] => Fluid–structure interaction; Finite element method; Experimental analysis; Addition mass; Damping; Stiffness
[url] =>
[oecd_obor_id] => 20704
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 604
[schvaleno] => 2016-03-22
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => POCHYLÝ, F.; MALENOVSKÝ, E.; POHANKA, L.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] => 10.1016/j.jfluidstructs.2012.09.001
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Peer-reviewed article not indexed in WoS or Scopus
[druh_popis] => Other original article or review in a peer-reviewed scientific periodical not included in WoS or Scopus
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISSN 0889-9746
[identifikator_popis] => ISSN - JOURNAL OF FLUIDS AND STRUCTURES (GB)
[riv_dodavka_id] => 478
[riv_dodavka_oznaceni] => RIV14-GA0-26210___
[riv_dodavka_rok] => 2014
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => POCHYLÝ, F.; MALENOVSKÝ, E.; POHANKA, L. New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses. JOURNAL OF FLUIDS AND STRUCTURES, 2013, vol. 37, no. 1, p. 171-184. ISSN: 0889-9746.
[citace_html] => POCHYLÝ, F.; MALENOVSKÝ, E.; POHANKA, L. New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses. JOURNAL OF FLUIDS AND STRUCTURES, 2013, vol. 37, no. 1, p. 171-184. ISSN: 0889-9746.
[citace_rtf] =>
[citace_bibtex] => @article{BUT96903,
author="František {Pochylý} and Eduard {Malenovský} and Lukáš {Pohanka}",
title="New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses.",
journal="JOURNAL OF FLUIDS AND STRUCTURES",
year="2013",
volume="37",
number="1",
pages="171--184",
doi="10.1016/j.jfluidstructs.2012.09.001",
issn="0889-9746"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20700
[oecd_tree_obor_nazev] => 2.7 Environmental engineering
[oecd_tree_podobor_id] => 20704
[oecd_tree_podobor_nazev] => Energy and fuels
[poznamka_metriky] =>
[nazev_en] => New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses.
[popis_en] => This report focuses on an analysis of the dynamic behaviour of a fluid–structure interaction system. This analysis is nonlinear, and the modal behaviour depends on many parameters, because large displacements are assumed. Technical applications include vibration of blades of rotational centrifugal pumps or water turbines. A new mathematical model of a boundary condition that allow for modal analysis and calculation of the steady state or unsteady state responses is presented in this article. This condition is based on a special convolutory integral for fluid velocity and pressure and their expansion into a series of eigenmodes of structure vibration. This approach allows for the separation of the structure and the fluid. A comparison between the computational and the experimental analyses is presented. Curvilinear coordinates and a Bézier body were chosen for the description of the geometrical configuration and the approximation of the solution.
[klicova_slova_en] => Fluid–structure interaction; Finite element method; Experimental analysis; Addition mass; Damping; Stiffness
[vysledek_datum] => 2013-02-01T00:00:00+01:00
)
[9] => Array
(
[vysledek_id] => 111227
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 111734
[vysledek_rok] => 2014
[nazev] => Seismic response of piping systems with viscous dampers
in nuclear power plants
[nazev_orig] => Seismic response of piping systems with viscous dampers
in nuclear power plants
[duvernost_udaju_id] => S
[popis] => Viscous dampers are widely used to ensure seismic resistance of pipelines and equipment in
nuclear power plants. Damping characteristics of these dampers are nonlinearly frequency
dependent and thus causing complications in computational modeling of seismic response.
[popis_orig] => Viscous dampers are widely used to ensure seismic resistance of pipelines and equipment in
nuclear power plants. Damping characteristics of these dampers are nonlinearly frequency
dependent and thus causing complications in computational modeling of seismic response.
[klicova_slova] => Viscous dampers; nuclear power plants; seismic resistance;
[klicova_slova_orig] => Viscous dampers; nuclear power plants; seismic resistance;
[url] => http://www.kme.zcu.cz/compmech/info.php?lang=cs
[oecd_obor_id] => 20305
[odpovedny_utvar_id] => 174
[odpovedny_utvar_nazev] => Energy Institute
[odpovedny_utvar_zkratka] => EI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 77492
[schvaleno] => 2016-01-05
[vykazovat_riv] => 1
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => CHLUD, M.; JOCH, L.; VAŠEK, M.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-261-0429-2
[identifikator_popis] => ISBN - Conference Computational Mechanics 2014 - BOOK OF EXTENDED ABSTRACTS
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => CHLUD, M.; JOCH, L.; VAŠEK, M. Seismic response of piping systems with viscous dampers in nuclear power plants. In Conference Computational Mechanics 2014 - BOOK OF EXTENDED ABSTRACTS. Plzeň: University of West Bohemia, 2014. p. 47-48. ISBN: 978-80-261-0429-2.
[citace_html] => CHLUD, M.; JOCH, L.; VAŠEK, M. Seismic response of piping systems with viscous dampers in nuclear power plants. In Conference Computational Mechanics 2014 - BOOK OF EXTENDED ABSTRACTS. Plzeň: University of West Bohemia, 2014. p. 47-48. ISBN: 978-80-261-0429-2.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT111227,
author="Michal {Chlud} and Lukáš {Joch} and Martin {Vašek}",
title="Seismic response of piping systems with viscous dampers
in nuclear power plants",
booktitle="Conference Computational Mechanics 2014 - BOOK OF EXTENDED ABSTRACTS",
year="2014",
pages="47--48",
publisher="University of West Bohemia",
address="Plzeň",
isbn="978-80-261-0429-2",
url="http://www.kme.zcu.cz/compmech/info.php?lang=cs"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20305
[oecd_tree_podobor_nazev] => Nuclear related engineering; (nuclear physics to be 1.3);
[poznamka_metriky] =>
[nazev_en] => Seismic response of piping systems with viscous dampers
in nuclear power plants
[popis_en] => Viscous dampers are widely used to ensure seismic resistance of pipelines and equipment in
nuclear power plants. Damping characteristics of these dampers are nonlinearly frequency
dependent and thus causing complications in computational modeling of seismic response.
[klicova_slova_en] => Viscous dampers; nuclear power plants; seismic resistance;
[vysledek_datum] => 2014-11-05T00:00:00+01:00
)
[10] => Array
(
[vysledek_id] => 9366
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 38533
[vysledek_rok] => 2003
[nazev] => Možnosti hodnocení zbytkových pnutí u Al slitin experimentálně a pomocí simulace
[nazev_orig] => Možnosti hodnocení zbytkových pnutí u Al slitin experimentálně a pomocí simulace
[duvernost_udaju_id] => S
[popis] => Rentgenografická metoda a odvrtávací metody byly použity při získávání oblasti zbytkového pnutí ve slitinách Al. Probírali jsme účinnost jednotlivých metod, možné chyby a stanovení zbytkového napětí v kritických místech po hloubce odlitku. V tomto článku jsou rozebrány možné experimentální metody stanovení zbytkového pnutí u Al-slitin.
[popis_orig] => Rentgenografická metoda a odvrtávací metody byly použity při získávání oblasti zbytkového pnutí ve slitinách Al. Probírali jsme účinnost jednotlivých metod, možné chyby a stanovení zbytkového napětí v kritických místech po hloubce odlitku. V tomto článku jsou rozebrány možné experimentální metody stanovení zbytkového pnutí u Al-slitin.
[klicova_slova] =>
[klicova_slova_orig] =>
[url] =>
[oecd_obor_id] => 20500
[odpovedny_utvar_id] => 178
[odpovedny_utvar_nazev] => Institute of Manufacturing Technology
[odpovedny_utvar_zkratka] => IMT
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2011-05-17
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ČECH, J., ZALABA, R., PALÁN, K., KRAUTSCHNEIDER, R., ZÍKA, J., ŠVAŘÍČEK, K., BAŘINOVÁ, D.
[pocet_tvurcu] => 7
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 80-8075-001-7
[identifikator_popis] => ISBN - TRANSFER 2003
[riv_dodavka_id] => 65
[riv_dodavka_oznaceni] => RIV11-MSM-26210___
[riv_dodavka_rok] => 2011
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ČECH, J., ZALABA, R., PALÁN, K., KRAUTSCHNEIDER, R., ZÍKA, J., ŠVAŘÍČEK, K., BAŘINOVÁ, D. Možnosti hodnocení zbytkových pnutí u Al slitin experimentálně a pomocí simulace. In TRANSFER 2003. 1. Trenčín: Fakulta špeciálnej techniky Trenčianska univerrzita Alexandra Dubčeka v Trenčíne, 2003. 7 s. ISBN: 80-8075-001-7.
[citace_html] => ČECH, J., ZALABA, R., PALÁN, K., KRAUTSCHNEIDER, R., ZÍKA, J., ŠVAŘÍČEK, K., BAŘINOVÁ, D. Možnosti hodnocení zbytkových pnutí u Al slitin experimentálně a pomocí simulace. In TRANSFER 2003. 1. Trenčín: Fakulta špeciálnej techniky Trenčianska univerrzita Alexandra Dubčeka v Trenčíne, 2003. 7 s. ISBN: 80-8075-001-7.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT9366,
author="Jaroslav {Čech} and Roman {Zalaba} and Kamil {Palán} and Roman {Krautschneider} and Jaroslav {Zíka} and Karel {Švaříček} and Dagmar {Bařinová}",
title="Možnosti hodnocení zbytkových pnutí u Al slitin experimentálně a pomocí simulace",
booktitle="TRANSFER 2003",
year="2003",
series="1",
number="1",
pages="7",
publisher="Fakulta špeciálnej techniky Trenčianska univerrzita Alexandra Dubčeka v Trenčíne",
address="Trenčín",
isbn="80-8075-001-7"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20500
[oecd_tree_obor_nazev] => 2.5 Materials engineering
[oecd_tree_podobor_id] =>
[oecd_tree_podobor_nazev] =>
[poznamka_metriky] =>
[nazev_en] => Possibilities of Evaluating Residual Stress in Al-alloys Experimentally and with the Aid of Simulation
[popis_en] => The radiographic and the strain-gauge (drill-hole) methods were used in evaluating the residual stress field in Al-alloys. Discussed in the paper are the potentials of individual methods, possible errors and the determination of residual stress in the critical points along the wall thickness of the casting. In the paper, the drill-hole method for establishing residual stress in Al-alloys disscused.
[klicova_slova_en] => residual stress, strain - gauge, simulation, local squeeze casting
[vysledek_datum] => 2003-10-23T00:00:00+02:00
)
[11] => Array
(
[vysledek_id] => 11360
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 43926
[vysledek_rok] => 2004
[nazev] => Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků
[nazev_orig] => Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků
[duvernost_udaju_id] => S
[popis] => Příspěvek zahrnuje experimentální zjišťování rázových sil a napětí u Taylorova kompresního testu (dále jen TAT, z angl. Taylor Anvil Test) provedený na vzorcích z oceli 12 122.3 za zvýšených teplot vzorků. Pomocí paměťového osciloskopu TEKTRONIX byly snímány napěťové pulsy, které byli následně přepočítány na rázovou - tvářecí sílu. Dále byla měřena povrchová teplota vzorků dotykovým čidlem, dopadová teplota bezkontaktní teplotní sondou Thermalert Compact MID a prakticky ověřeno nové konstrukční řešení vložky nosiče. Snahou je přiblížit experiment TAT, reálným tvářecím podmínkám v praxi. Při tváření za studena totiž dochází k ohřevu materiálu součásti, vlivem přemístění atomů uvnitř kovu.
[popis_orig] => Příspěvek zahrnuje experimentální zjišťování rázových sil a napětí u Taylorova kompresního testu (dále jen TAT, z angl. Taylor Anvil Test) provedený na vzorcích z oceli 12 122.3 za zvýšených teplot vzorků. Pomocí paměťového osciloskopu TEKTRONIX byly snímány napěťové pulsy, které byli následně přepočítány na rázovou - tvářecí sílu. Dále byla měřena povrchová teplota vzorků dotykovým čidlem, dopadová teplota bezkontaktní teplotní sondou Thermalert Compact MID a prakticky ověřeno nové konstrukční řešení vložky nosiče. Snahou je přiblížit experiment TAT, reálným tvářecím podmínkám v praxi. Při tváření za studena totiž dochází k ohřevu materiálu součásti, vlivem přemístění atomů uvnitř kovu.
[klicova_slova] => Taylor anvil test, impacts force and stresses
[klicova_slova_orig] => Taylor anvil test, impacts force and stresses
[url] =>
[oecd_obor_id] => 20301
[odpovedny_utvar_id] => 178
[odpovedny_utvar_nazev] => Institute of Manufacturing Technology
[odpovedny_utvar_zkratka] => IMT
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2011-05-17
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => KRÁSNY, D.; PEJCHAL, P.; FOREJT, M.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 80-239-2964-X
[identifikator_popis] => ISBN - Experimentální analýza napětí 2004
[riv_dodavka_id] => 65
[riv_dodavka_oznaceni] => RIV11-MSM-26210___
[riv_dodavka_rok] => 2011
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => KRÁSNY, D.; PEJCHAL, P.; FOREJT, M. Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků. In Experimentální analýza napětí 2004. Plzeň: ŠKODA VÝZKUM s.r.o., 2004. s. 125-128. ISBN: 80-239-2964-X.
[citace_html] => KRÁSNY, D.; PEJCHAL, P.; FOREJT, M. Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků. In Experimentální analýza napětí 2004. Plzeň: ŠKODA VÝZKUM s.r.o., 2004. s. 125-128. ISBN: 80-239-2964-X.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT11360,
author="Dalibor {Krásny} and Petr {Pejchal} and Milan {Forejt}",
title="Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků",
booktitle="Experimentální analýza napětí 2004",
year="2004",
number="1",
pages="125--128",
publisher="ŠKODA VÝZKUM s.r.o.",
address="Plzeň",
isbn="80-239-2964-X"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20301
[oecd_tree_podobor_nazev] => Mechanical engineering
[poznamka_metriky] =>
[nazev_en] => Measurement of deformation forces and stresses during the Taylor anvil test at the increases temperatures of the specimens
[popis_en] => This article deals with the experimental measurement of deformation forces and stresses during the Taylor anvil test performed with the specimens of 12 122.3 steel at the increased temperature of the specimens. By the help of the storage oscilloscope Tektronix the stress pulses were taken and consequently converted to the deformation - forming force. Further the surface temperature of the specimens was measured with the contact sensor, the impact temperature with the contactless temperature sensing head called Thermalert Compact MID and the new constructional design of the carrier thermal block was practically verified. Our effort was to approach the TAT experiment to real forming conditions in the praxis. That is because the component material warms up at the cold forming process in virtue of the translocation of the atoms inside of the metal.
[klicova_slova_en] => Taylor anvil test, impacts force and stresses
[vysledek_datum] => 2004-06-01T00:00:00+02:00
)
[12] => Array
(
[vysledek_id] => 12111
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 44712
[vysledek_rok] => 2004
[nazev] => Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys
[nazev_orig] => Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys
[duvernost_udaju_id] => S
[popis] => The radiographic and the strain-gauge (drill hole) methods were used in evaluating the residual stress fields in Al-alloys. Two simulation software programs (MAGMA, SIMTEC) were used to compare the residual stress values established. Discussed in the paper are the potentials of individual methods, possible errors and the determination of residual stress at the critical points in the wall thickness of the casting.
[popis_orig] => The radiographic and the strain-gauge (drill hole) methods were used in evaluating the residual stress fields in Al-alloys. Two simulation software programs (MAGMA, SIMTEC) were used to compare the residual stress values established. Discussed in the paper are the potentials of individual methods, possible errors and the determination of residual stress at the critical points in the wall thickness of the casting.
[klicova_slova] =>
[klicova_slova_orig] =>
[url] =>
[oecd_obor_id] => 20500
[odpovedny_utvar_id] => 178
[odpovedny_utvar_nazev] => Institute of Manufacturing Technology
[odpovedny_utvar_zkratka] => IMT
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2011-05-17
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ČECH, J., PALÁN, K., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D.
[pocet_tvurcu] => 5
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] =>
[identifikator_popis] =>
[riv_dodavka_id] => 65
[riv_dodavka_oznaceni] => RIV11-MSM-26210___
[riv_dodavka_rok] => 2011
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ČECH, J., PALÁN, K., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D. Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys. In Archiwum odlewnictwa. 1. Katowice: Polska akademia nauk, 2004. 11 p.
[citace_html] => ČECH, J., PALÁN, K., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D. Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys. In Archiwum odlewnictwa. 1. Katowice: Polska akademia nauk, 2004. 11 p.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT12111,
author="Jaroslav {Čech} and Kamil {Palán} and Roman {Zalaba} and Karel {Švaříček} and Dagmar {Bařinová}",
title="Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys",
booktitle="Archiwum odlewnictwa",
year="2004",
series="1",
number="1",
pages="11",
publisher="Polska akademia nauk",
address="Katowice"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20500
[oecd_tree_obor_nazev] => 2.5 Materials engineering
[oecd_tree_podobor_id] =>
[oecd_tree_podobor_nazev] =>
[poznamka_metriky] =>
[nazev_en] => Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys
[popis_en] => The radiographic and the strain-gauge (drill hole) methods were used in evaluating the residual stress fields in Al-alloys. Two simulation software programs (MAGMA, SIMTEC) were used to compare the residual stress values established. Discussed in the paper are the potentials of individual methods, possible errors and the determination of residual stress at the critical points in the wall thickness of the casting.
[klicova_slova_en] => simulation software, residual stress, die-casting, squeeze casting
[vysledek_datum] => 2004-09-21T00:00:00+02:00
)
[13] => Array
(
[vysledek_id] => 12263
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 44787
[vysledek_rok] => 2004
[nazev] => Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys
[nazev_orig] => Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys
[duvernost_udaju_id] => S
[popis] => In the experimental part of the work the measuring was performed on the cylinder block of an 03D engine (the upper and the lower part). Residual stress was determined directly on the casting and on specimens that had been cut from these castings.
In the calculation of ressidual stress, the material constants affect the result in the order of units of MPa. The residual stress values in the interval 0-1 mm are mostly of the compression stress kind while above 1 mm they are residual tensile stress values.
[popis_orig] => In the experimental part of the work the measuring was performed on the cylinder block of an 03D engine (the upper and the lower part). Residual stress was determined directly on the casting and on specimens that had been cut from these castings.
In the calculation of ressidual stress, the material constants affect the result in the order of units of MPa. The residual stress values in the interval 0-1 mm are mostly of the compression stress kind while above 1 mm they are residual tensile stress values.
[klicova_slova] =>
[klicova_slova_orig] =>
[url] =>
[oecd_obor_id] => 20500
[odpovedny_utvar_id] => 178
[odpovedny_utvar_nazev] => Institute of Manufacturing Technology
[odpovedny_utvar_zkratka] => IMT
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FME
[nadrazena_soucast_nazev] => Faculty of Mechanical Engineering
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2011-05-17
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ČECH, J., RUSÍN, K., ZEMČÍK, L., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D.
[pocet_tvurcu] => 6
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publication results
[druh_nazev] => Paper in proceedings (conference paper)
[druh_popis] => Paper in proceedings (conference paper)
[stav] => Approved
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 88-85298-51-6
[identifikator_popis] => ISBN - 2nd International Conference and Exhibition on New Developments in Metallurgical Process Technology
[riv_dodavka_id] => 65
[riv_dodavka_oznaceni] => RIV11-MSM-26210___
[riv_dodavka_rok] => 2011
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ČECH, J., RUSÍN, K., ZEMČÍK, L., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D. Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys. In 2nd International Conference and Exhibition on New Developments in Metallurgical Process Technology. Riva del Grada: Associazione Italiana di Metallurgia, 2004. 5 p. ISBN: 88-85298-51-6.
[citace_html] => ČECH, J., RUSÍN, K., ZEMČÍK, L., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D. Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys. In 2nd International Conference and Exhibition on New Developments in Metallurgical Process Technology. Riva del Grada: Associazione Italiana di Metallurgia, 2004. 5 p. ISBN: 88-85298-51-6.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT12263,
author="Jaroslav {Čech} and Karel {Rusín} and Ladislav {Zemčík} and Roman {Zalaba} and Karel {Švaříček} and Dagmar {Bařinová}",
title="Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys",
booktitle="2nd International Conference and Exhibition on New Developments in Metallurgical Process Technology",
year="2004",
pages="5",
publisher="Associazione Italiana di Metallurgia",
address="Riva del Grada",
isbn="88-85298-51-6"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20500
[oecd_tree_obor_nazev] => 2.5 Materials engineering
[oecd_tree_podobor_id] =>
[oecd_tree_podobor_nazev] =>
[poznamka_metriky] =>
[nazev_en] => Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys
[popis_en] => In the experimental part of the work the measuring was performed on the cylinder block of an 03D engine (the upper and the lower part). Residual stress was determined directly on the casting and on specimens that had been cut from these castings.
In the calculation of ressidual stress, the material constants affect the result in the order of units of MPa. The residual stress values in the interval 0-1 mm are mostly of the compression stress kind while above 1 mm they are residual tensile stress values.
[klicova_slova_en] => Al-alloys, stress, die casting
[vysledek_datum] => 2004-09-19T00:00:00+02:00
)
)
)
Array
(
[total] => 3612
[page] => 234
[count] => 14
[n_pages] => 241
[pagelen] => 15
[odkaz] => typVysledku=&rok=&ftext=&btnSubmit=1
[base_detail] => /en/veda/publikace/detail/
[base_page] => /en/veda/publikace
[vysledek] => Array
(
[0] => Array
(
[quotations] => POCHYLÝ, F.; MALENOVSKÝ, E.
[title] => NEW MATHEMATICAL AND COMPUTATIONAL MODEL OF FLUID - STRUCTURE INTERACTION USING FEM
[typ] => PV
[year] => 2008
[id_vav] => 26818
)
[1] => Array
(
[quotations] => POCHYLÝ, F.; MALENOVSKÝ, E.
[title] => New Mathematical and Computational Model of Elastic Continuum Interaction with Liquid.
[typ] => PV
[year] => 2008
[id_vav] => 47214
)
[2] => Array
(
[quotations] => POCHYLÝ, F.; MALENOVSKÝ, E.
[title] => NEW APPROACH TO THE DYNAMICS ANALYSIS OF INTERACTION AN ELASTIC STRUCTURE AND LIQUID
[typ] => PV
[year] => 2008
[id_vav] => 48412
)
[3] => Array
(
[quotations] => POCHYLÝ, F.; KOZUBKOVÁ, M.; MALENOVSKÝ, E.
[title] => Přídavné účinky tekutiny působící na tuhé těleso s uvažováním vlivu teploty
[typ] => OS
[year] => 2007
[id_vav] => 65924
)
[4] => Array
(
[quotations] => POCHYLÝ, F.; HABÁN, V.; MALENOVSKÝ, E.
[title] => Přídavné účinky tekutiny, působící na píst pístového čerpadla
[typ] => OS
[year] => 2006
[id_vav] => 65929
)
[5] => Array
(
[quotations] => POCHYLÝ, F.; MALENOVSKÝ, E.; HABÁN, V.
[title] => Přídavné účinky kapaliny, působící na píst objemového čerpadla.
[typ] => OS
[year] => 2005
[id_vav] => 65973
)
[6] => Array
(
[quotations] => KUBIS, A.; NAVRÁTIL, P.
[title] => influence of eccentricity of the axial flow in leakage joints
[typ] => PV
[year] => 2011
[id_vav] => 72796
)
[7] => Array
(
[quotations] => POCHYLÝ, F.; FIALOVÁ, S.; MALENOVSKÝ, E.
[title] => Bearing with magnetic fluid and hydrophobic surface of the lining
[typ] => PV
[year] => 2012
[id_vav] => 92938
)
[8] => Array
(
[quotations] => POCHYLÝ, F.; MALENOVSKÝ, E.; POHANKA, L.
[title] => New approach for solving the fluid–structure interaction eigenvalue problem by modal analysis and the calculation of steady-state or unsteady responses.
[typ] => PV
[year] => 2013
[id_vav] => 96903
)
[9] => Array
(
[quotations] => CHLUD, M.; JOCH, L.; VAŠEK, M.
[title] => Seismic response of piping systems with viscous dampers
in nuclear power plants
[typ] => PV
[year] => 2014
[id_vav] => 111227
)
[10] => Array
(
[quotations] => ČECH, J., ZALABA, R., PALÁN, K., KRAUTSCHNEIDER, R., ZÍKA, J., ŠVAŘÍČEK, K., BAŘINOVÁ, D.
[title] => Možnosti hodnocení zbytkových pnutí u Al slitin experimentálně a pomocí simulace
[typ] => PV
[year] => 2003
[id_vav] => 9366
)
[11] => Array
(
[quotations] => KRÁSNY, D.; PEJCHAL, P.; FOREJT, M.
[title] => Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků
[typ] => PV
[year] => 2004
[id_vav] => 11360
)
[12] => Array
(
[quotations] => ČECH, J., PALÁN, K., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D.
[title] => Comparison of the experimental and the simulation method of establishing residual stress in Al-alloys
[typ] => PV
[year] => 2004
[id_vav] => 12111
)
[13] => Array
(
[quotations] => ČECH, J., RUSÍN, K., ZEMČÍK, L., ZALABA, R., ŠVAŘÍČEK, K., BAŘINOVÁ, D.
[title] => Comparison of the Experimental and the Simulation Method of Establishing Residual Stress in Aluminium Alloys
[typ] => PV
[year] => 2004
[id_vav] => 12263
)
)
)