Detail publikace
Lomová odezva na dynamické namáhání u kompozitů na bázi SiOC
HALASOVÁ, M. ČERNÝ, M. CHLUP, Z. STRACHOTA, A. DLOUHÝ, I.
Český název
Lomová odezva na dynamické namáhání u kompozitů na bázi SiOC
Anglický název
Fracture response of SiOC-based composites on dynamic loading
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
en
Originální abstrakt
The fracture resistance to the dynamic loading of composites based on partially pyrolysed SiOC glass reinforced with basalt fibres was investigated using an instrumented impact test. The three-point bend loading configuration of the specimen bars prepared from the composite plate was used. Evolution of the matrix during the pyrolysis plays a key role in creation of bonding between the matrix and fibres, which was in the form of woven fabrics. Different temperatures of pyrolysis were applied in order to determine their influence on the fracture behaviour during impact tests. The high speed camera was employed to observe fracture response to impact loading during the fracture process. The temperature range for pyrolysis was chosen from 600 to 800C with the step of 50C. The partial melting of basalt fibres occurred at temperatures above 800C. Observation of fractographic features on the fracture surfaces was performed using scanning electron microscopy.
Český abstrakt
Lomová odolnost vůči dynamickému zatěžování kompozitů založených na částečně pyrolyzovaných SiOC sklech vyztužených čedičovými vlákny byla zkoumána pomocí instrumentované zkoušky rázem v ohybu. Zkušební vzorky kompozitů byly zatěžovány v tříbodovém ohybu. Vývoj matrice během pyrolýzy hraje klíčovou roli při vytváření vazby mezi matricí a vlákny, jež byly v podobě tkaniny. Rozdílné pyrolýzní teploty byly použity za účelem určit jejich vliv na lomové chování při porušování. Rozsah teplot byl zvolen od 600 do 800C s krokem 50C. Částečné tání čedičových vláken nastalo za teplot nad 800C. Pozorování fraktografických prvků na lomových plochách bylo provedeno pomocí skenovací elektronové mikroskopie.
Anglický abstrakt
The fracture resistance to the dynamic loading of composites based on partially pyrolysed SiOC glass reinforced with basalt fibres was investigated using an instrumented impact test. The three-point bend loading configuration of the specimen bars prepared from the composite plate was used. Evolution of the matrix during the pyrolysis plays a key role in creation of bonding between the matrix and fibres, which was in the form of woven fabrics. Different temperatures of pyrolysis were applied in order to determine their influence on the fracture behaviour during impact tests. The high speed camera was employed to observe fracture response to impact loading during the fracture process. The temperature range for pyrolysis was chosen from 600 to 800C with the step of 50C. The partial melting of basalt fibres occurred at temperatures above 800C. Observation of fractographic features on the fracture surfaces was performed using scanning electron microscopy.
Klíčová slova anglicky
SiOC glass, basalt reinforcement, woven fabric, impact strength, energy consumption, fracture surface
Vydáno
11.04.2016
Nakladatel
Sage Publications
Místo
UK
ISSN
0021-9983
Ročník
50
Číslo
11
Strany od–do
1547–1554
Počet stran
8
BIBTEX
@article{BUT115807,
author="Martina {Halasová} and Martin {Černý} and Zdeněk {Chlup} and Adam {Strachota} and Ivo {Dlouhý},
title="Fracture response of SiOC-based composites on dynamic loading",
year="2016",
volume="50",
number="11",
month="April",
pages="1547--1554",
publisher="Sage Publications",
address="UK",
issn="0021-9983"
}