Array
(
[page] => 56
[item_count] => 2086
[items_per_page] => 15
[data] => Array
(
[0] => Array
(
[vysledek_id] => 27797
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 69772
[vysledek_rok] => 2007
[nazev] => Control circuit diagnostics trough unit step response
[nazev_orig] => Control circuit diagnostics trough unit step response
[duvernost_udaju_id] => S
[popis] => Control quality parameters are possible use for control circuit diagnostics. These quantitative indicators can be represented in time, transform and frequency domain. The quality in time domain is assign according to unit step response course. There is possible to determine from unit step response shape for example setting time, maximum relative overshoot, peak time, etc. This paper describes controller design for plant and subsequently influence of controller parameters modification over course of unit step response. Control circuit diagnostics is analyzed through quantitative indicators above.
[popis_orig] => Control quality parameters are possible use for control circuit diagnostics. These quantitative indicators can be represented in time, transform and frequency domain. The quality in time domain is assign according to unit step response course. There is possible to determine from unit step response shape for example setting time, maximum relative overshoot, peak time, etc. This paper describes controller design for plant and subsequently influence of controller parameters modification over course of unit step response. Control circuit diagnostics is analyzed through quantitative indicators above.
[klicova_slova] => Diagnostics; Unit step response; Setting time; Maximum relative overshoot; Peak time.
[klicova_slova_orig] => Diagnostics; Unit step response; Setting time; Maximum relative overshoot; Peak time.
[url] =>
[oecd_obor_id] => 20306
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => DAVIDOVÁ, O.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-7318-570-1
[identifikator_popis] => ISBN - Sborník přednášek TD 2007 - DIAGON 2007
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => DAVIDOVÁ, O. Control circuit diagnostics trough unit step response. In Sborník přednášek TD 2007 - DIAGON 2007. Zlín: Academia centrum Univerzity Tomáše Bati, 2007. p. 75-80. ISBN: 978-80-7318-570-1.
[citace_html] => DAVIDOVÁ, O. Control circuit diagnostics trough unit step response. In Sborník přednášek TD 2007 - DIAGON 2007. Zlín: Academia centrum Univerzity Tomáše Bati, 2007. p. 75-80. ISBN: 978-80-7318-570-1.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT27797,
author="Olga {Davidová}",
title="Control circuit diagnostics trough unit step response",
booktitle="Sborník přednášek TD 2007 - DIAGON 2007",
year="2007",
number="1",
pages="75--80",
publisher="Academia centrum Univerzity Tomáše Bati",
address="Zlín",
isbn="978-80-7318-570-1"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20306
[oecd_tree_podobor_nazev] => Audio engineering, reliability analysis
[poznamka_metriky] =>
[nazev_en] => Control circuit diagnostics trough unit step response
[popis_en] => Control quality parameters are possible use for control circuit diagnostics. These quantitative indicators can be represented in time, transform and frequency domain. The quality in time domain is assign according to unit step response course. There is possible to determine from unit step response shape for example setting time, maximum relative overshoot, peak time, etc. This paper describes controller design for plant and subsequently influence of controller parameters modification over course of unit step response. Control circuit diagnostics is analyzed through quantitative indicators above.
[klicova_slova_en] => Diagnostics; Unit step response; Setting time; Maximum relative overshoot; Peak time.
[vysledek_datum] => 2007-05-10T00:00:00+02:00
)
[1] => Array
(
[vysledek_id] => 27852
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 70444
[vysledek_rok] => 2007
[nazev] => The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication
[nazev_orig] => The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication
[duvernost_udaju_id] => S
[popis] => The behaviour of thin viscous boundary films in the rough surface rolling-sliding point contact operated under thin film lubrication conditions have been observed by thin film colorimetric interferometry. Changes in film thickness distribution within the lubricated contact between micro-textured steel ball and glass disc were studies with both mineral base oil and formulated oils. It has been shown in the previous studies that the presence of the micro-dent within concentrated contact results in film thickness reduction located downstream of the leading edge of the micro-dent for the operational conditions when the disc is moving faster than the micro-textured ball. In this case such a reduction could cause the local film breakdown of very thin films. Results obtained in this study proved that thin viscous boundary films formed on rubbing surfaces can help to separate rubbing surfaces even under very thin film conditions.
[popis_orig] => The behaviour of thin viscous boundary films in the rough surface rolling-sliding point contact operated under thin film lubrication conditions have been observed by thin film colorimetric interferometry. Changes in film thickness distribution within the lubricated contact between micro-textured steel ball and glass disc were studies with both mineral base oil and formulated oils. It has been shown in the previous studies that the presence of the micro-dent within concentrated contact results in film thickness reduction located downstream of the leading edge of the micro-dent for the operational conditions when the disc is moving faster than the micro-textured ball. In this case such a reduction could cause the local film breakdown of very thin films. Results obtained in this study proved that thin viscous boundary films formed on rubbing surfaces can help to separate rubbing surfaces even under very thin film conditions.
[klicova_slova] => dent; Thin film lubrication; Film Thickness
[klicova_slova_orig] => dent; Thin film lubrication; Film Thickness
[url] =>
[oecd_obor_id] => 20301
[odpovedny_utvar_id] => 168
[odpovedny_utvar_nazev] => Ústav konstruování
[odpovedny_utvar_zkratka] => ÚK
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => KŘUPKA, I.; HARTL, M.; POLIŠČUK, R.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-961-90254-8-2
[identifikator_popis] => ISBN - Ecotrib 2007
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => KŘUPKA, I.; HARTL, M.; POLIŠČUK, R. The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication. In Ecotrib 2007. 1. Ljubljana: Slovenian society for tribology, 2007. p. 745-754. ISBN: 978-961-90254-8-2.
[citace_html] => KŘUPKA, I.; HARTL, M.; POLIŠČUK, R. The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication. In Ecotrib 2007. 1. Ljubljana: Slovenian society for tribology, 2007. p. 745-754. ISBN: 978-961-90254-8-2.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT27852,
author="Ivan {Křupka} and Martin {Hartl} and Radek {Poliščuk}",
title="The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication",
booktitle="Ecotrib 2007",
year="2007",
series="1",
number="1",
pages="745--754",
publisher="Slovenian society for tribology",
address="Ljubljana",
isbn="978-961-90254-8-2"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20300
[oecd_tree_obor_nazev] => 2.3 Mechanical engineering
[oecd_tree_podobor_id] => 20301
[oecd_tree_podobor_nazev] => Mechanical engineering
[poznamka_metriky] =>
[nazev_en] => The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication
[popis_en] => The behaviour of thin viscous boundary films in the rough surface rolling-sliding point contact operated under thin film lubrication conditions have been observed by thin film colorimetric interferometry. Changes in film thickness distribution within the lubricated contact between micro-textured steel ball and glass disc were studies with both mineral base oil and formulated oils. It has been shown in the previous studies that the presence of the micro-dent within concentrated contact results in film thickness reduction located downstream of the leading edge of the micro-dent for the operational conditions when the disc is moving faster than the micro-textured ball. In this case such a reduction could cause the local film breakdown of very thin films. Results obtained in this study proved that thin viscous boundary films formed on rubbing surfaces can help to separate rubbing surfaces even under very thin film conditions.
[klicova_slova_en] => dent; Thin film lubrication; Film Thickness
[vysledek_datum] => 2007-06-12T00:00:00+02:00
)
[2] => Array
(
[vysledek_id] => 27893
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 70506
[vysledek_rok] => 2007
[nazev] => Solving the Travelling Salesman Problem Using GAMS
[nazev_orig] => Solving the Travelling Salesman Problem Using GAMS
[duvernost_udaju_id] => S
[popis] => The Travelling Salesman Problem (TSP) is well known problem consisting of designing the optimal route for a salesman originating and terminating at the depot. The salesman has to visit each customer exactly once and the total distance travelled has to be minimized. TSP is supposed to be NP-hard which roughly means that the computation time needed by an exact algorithm rises exponentially with the length of input (i.e. --- in the case of TSP --- the number of customers). This paper discusses how this NP-hard problem can be solved is optimization tool GAMS and purposes results.
[popis_orig] => The Travelling Salesman Problem (TSP) is well known problem consisting of designing the optimal route for a salesman originating and terminating at the depot. The salesman has to visit each customer exactly once and the total distance travelled has to be minimized. TSP is supposed to be NP-hard which roughly means that the computation time needed by an exact algorithm rises exponentially with the length of input (i.e. --- in the case of TSP --- the number of customers). This paper discusses how this NP-hard problem can be solved is optimization tool GAMS and purposes results.
[klicova_slova] => travelling salesman problem, NP-hard, GAMS, optimization
[klicova_slova_orig] => travelling salesman problem, NP-hard, GAMS, optimization
[url] =>
[oecd_obor_id] => 10103
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] =>
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => NETUŠIL, Z.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-248-1649-4
[identifikator_popis] => ISBN - Sborník z 16. semináře Moderní matematické metody v inženýrství
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => NETUŠIL, Z. Solving the Travelling Salesman Problem Using GAMS. In Sborník z 16. semináře Moderní matematické metody v inženýrství. 1. Ostrava, ČR: VŠB - TECHNICKÁ UNIVERZITA OSTRAVA, 2007. p. 216-220. ISBN: 978-80-248-1649-4.
[citace_html] => NETUŠIL, Z. Solving the Travelling Salesman Problem Using GAMS. In Sborník z 16. semináře Moderní matematické metody v inženýrství. 1. Ostrava, ČR: VŠB - TECHNICKÁ UNIVERZITA OSTRAVA, 2007. p. 216-220. ISBN: 978-80-248-1649-4.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT27893,
author="Zdeněk {Netušil}",
title="Solving the Travelling Salesman Problem Using GAMS",
booktitle="Sborník z 16. semináře Moderní matematické metody v inženýrství",
year="2007",
series="1",
number="1",
pages="216--220",
publisher="VŠB - TECHNICKÁ UNIVERZITA OSTRAVA",
address="Ostrava, ČR",
isbn="978-80-248-1649-4"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10100
[oecd_tree_obor_nazev] => 1.1 Mathematics
[oecd_tree_podobor_id] => 10103
[oecd_tree_podobor_nazev] => Statistics and probability
[poznamka_metriky] =>
[nazev_en] => Solving the Travelling Salesman Problem Using GAMS
[popis_en] => The Travelling Salesman Problem (TSP) is well known problem consisting of designing the optimal route for a salesman originating and terminating at the depot. The salesman has to visit each customer exactly once and the total distance travelled has to be minimized. TSP is supposed to be NP-hard which roughly means that the computation time needed by an exact algorithm rises exponentially with the length of input (i.e. --- in the case of TSP --- the number of customers). This paper discusses how this NP-hard problem can be solved is optimization tool GAMS and purposes results.
[klicova_slova_en] => travelling salesman problem, NP-hard, GAMS, optimization
[vysledek_datum] => 2007-02-06T00:00:00+01:00
)
[3] => Array
(
[vysledek_id] => 27906
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 71071
[vysledek_rok] => 2007
[nazev] => Systémové a technologické aspekty řízení znalostí s využitím inteligentní automatizace
[nazev_orig] => Systémové a technologické aspekty řízení znalostí s využitím inteligentní automatizace
[duvernost_udaju_id] => S
[popis] => Mnoho projektů pro zavedení procesu řízení znalostí je zaměřeno na technologickou podstatu řešení. Málo firem věnuje pozornost i dalším hlediskům, která jsou však také důležitá: procesní hledisko, systémové hledisko a gnoseologické hledisko. Absence těchto dalších hledisek však může být příčinou neúspěchu takového projektu. Proto je důležité zahrnout tato hlediska do projektu, aby byl řešen komplexně.
[popis_orig] => Mnoho projektů pro zavedení procesu řízení znalostí je zaměřeno na technologickou podstatu řešení. Málo firem věnuje pozornost i dalším hlediskům, která jsou však také důležitá: procesní hledisko, systémové hledisko a gnoseologické hledisko. Absence těchto dalších hledisek však může být příčinou neúspěchu takového projektu. Proto je důležité zahrnout tato hlediska do projektu, aby byl řešen komplexně.
[klicova_slova] => : projektové řízení, řízení znalostí, systémový přístup, procesní přístup, expertní systém, dolování znalostí z dat, inteligentní automatizace
[klicova_slova_orig] => : projektové řízení, řízení znalostí, systémový přístup, procesní přístup, expertní systém, dolování znalostí z dat, inteligentní automatizace
[url] =>
[oecd_obor_id] => 10201
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => LACKO, B.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-7318-646-3
[identifikator_popis] => ISBN - Znalostní ekonomika - rendy rozvoje vzdělávání, vědy a praxe
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => LACKO, B. Systémové a technologické aspekty řízení znalostí s využitím inteligentní automatizace. In Znalostní ekonomika - rendy rozvoje vzdělávání, vědy a praxe. 1. Zlín: Univerzita Tomáše Bati, 2007. s. 73-78. ISBN: 978-80-7318-646-3.
[citace_html] => LACKO, B. Systémové a technologické aspekty řízení znalostí s využitím inteligentní automatizace. In Znalostní ekonomika - rendy rozvoje vzdělávání, vědy a praxe. 1. Zlín: Univerzita Tomáše Bati, 2007. s. 73-78. ISBN: 978-80-7318-646-3.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT27906,
author="Branislav {Lacko}",
title="Systémové a technologické aspekty řízení znalostí s využitím inteligentní automatizace",
booktitle="Znalostní ekonomika - rendy rozvoje vzdělávání, vědy a praxe",
year="2007",
series="1",
number="1",
pages="73--78",
publisher="Univerzita Tomáše Bati",
address="Zlín",
isbn="978-80-7318-646-3"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10200
[oecd_tree_obor_nazev] => 1.2 Computer and information sciences
[oecd_tree_podobor_id] => 10201
[oecd_tree_podobor_nazev] => Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8)
[poznamka_metriky] =>
[nazev_en] => System and technology aspects of knowledge management with intelligent automation
[popis_en] => Very many projects of knowledge management implementation prefers technology aspects. Only few firms respects next point of views - process aspects, system aspects and gnoseologic aspects. Passing these aspects may be the source of project failure. Therefore these point of view must be respected into knowledge management projects for the successful finish.
[klicova_slova_en] => project management, knowledge management, system approach, process approach, expert system, data mining, intelligent automation
[vysledek_datum] => 2007-11-29T00:00:00+01:00
)
[4] => Array
(
[vysledek_id] => 28028
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 69953
[vysledek_rok] => 2007
[nazev] => Possibilities of control experimental testing devices for biomechanics
[nazev_orig] => Possibilities of control experimental testing devices for biomechanics
[duvernost_udaju_id] => S
[popis] => This paper describes our approach to control of the two types of experimental devices for biomechanics. First type of experimental device is the device for examining the spinal elements, device has three controlled axes. Second type is the device for testing of the wear of polyethylene cups with two controlled axes. All controlled axes are equipped with DC motor power drives. At the end of paper control units of the power drives are described.
[popis_orig] => This paper describes our approach to control of the two types of experimental devices for biomechanics. First type of experimental device is the device for examining the spinal elements, device has three controlled axes. Second type is the device for testing of the wear of polyethylene cups with two controlled axes. All controlled axes are equipped with DC motor power drives. At the end of paper control units of the power drives are described.
[klicova_slova] => control, biomechanics, experimental testing
[klicova_slova_orig] => control, biomechanics, experimental testing
[url] =>
[oecd_obor_id] => 10201
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => HOUŠKA, P.; ONDROUŠEK, V.; HOUFEK, M.; VĚCHET, S.
[pocet_tvurcu] => 4
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-87012-06-2
[identifikator_popis] => ISBN - Engineering Mechanics 2007
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => HOUŠKA, P.; ONDROUŠEK, V.; HOUFEK, M.; VĚCHET, S. Possibilities of control experimental testing devices for biomechanics. In Engineering Mechanics 2007. 2007. Praha: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague, 2007. s. 93-94. ISBN: 978-80-87012-06-2.
[citace_html] => HOUŠKA, P.; ONDROUŠEK, V.; HOUFEK, M.; VĚCHET, S. Possibilities of control experimental testing devices for biomechanics. In Engineering Mechanics 2007. 2007. Praha: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague, 2007. s. 93-94. ISBN: 978-80-87012-06-2.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT28028,
author="Pavel {Houška} and Vít {Ondroušek} and Martin {Houfek} and Stanislav {Věchet}",
title="Possibilities of control experimental testing devices for biomechanics",
booktitle="Engineering Mechanics 2007",
year="2007",
series="2007",
number="1",
pages="93--94",
publisher="Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague",
address="Praha",
isbn="978-80-87012-06-2"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10200
[oecd_tree_obor_nazev] => 1.2 Computer and information sciences
[oecd_tree_podobor_id] => 10201
[oecd_tree_podobor_nazev] => Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8)
[poznamka_metriky] =>
[nazev_en] => Possibilities of control experimental testing devices for biomechanics
[popis_en] => This paper describes our approach to control of the two types of experimental devices for biomechanics. First type of experimental device is the device for examining the spinal elements, device has three controlled axes. Second type is the device for testing of the wear of polyethylene cups with two controlled axes. All controlled axes are equipped with DC motor power drives. At the end of paper control units of the power drives are described.
[klicova_slova_en] => control, biomechanics, experimental testing
[vysledek_datum] => 2007-05-01T00:00:00+02:00
)
[5] => Array
(
[vysledek_id] => 28074
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 70043
[vysledek_rok] => 2007
[nazev] => Numerical methods for continuous-time control systems
[nazev_orig] => Numerical methods for continuous-time control systems
[duvernost_udaju_id] => S
[popis] => Discretization is necessary for the analysis and design of discrete-time systems. It is also useful for simulating continuous-time control systems on the digital computer. One of the simplest ways of discretizing or approximating a continuous-time plant is numerical approximation of differential equations. Difference equations can be obtained by discretizing differential equations - it is the first part of this contribution. The other way of discretization is discretization by z transformation of transfer function G(s). In this contribution is shown Euler's method and bili-near method of this transformation.
[popis_orig] => Discretization is necessary for the analysis and design of discrete-time systems. It is also useful for simulating continuous-time control systems on the digital computer. One of the simplest ways of discretizing or approximating a continuous-time plant is numerical approximation of differential equations. Difference equations can be obtained by discretizing differential equations - it is the first part of this contribution. The other way of discretization is discretization by z transformation of transfer function G(s). In this contribution is shown Euler's method and bili-near method of this transformation.
[klicova_slova] => Diskkretzation; continuous-time systems; discrete-time systems; Z-transform.
[klicova_slova_orig] => Diskkretzation; continuous-time systems; discrete-time systems; Z-transform.
[url] =>
[oecd_obor_id] => 10201
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ŠVARC, I.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-961-248-054-7
[identifikator_popis] => ISBN - Information systems in automation
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ŠVARC, I. Numerical methods for continuous-time control systems. In Information systems in automation. Maribor - Slovinsko: University of Maribor-Slovenia, 2007. p. 66-70. ISBN: 978-961-248-054-7.
[citace_html] => ŠVARC, I. Numerical methods for continuous-time control systems. In Information systems in automation. Maribor - Slovinsko: University of Maribor-Slovenia, 2007. p. 66-70. ISBN: 978-961-248-054-7.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT28074,
author="Ivan {Švarc}",
title="Numerical methods for continuous-time control systems",
booktitle="Information systems in automation",
year="2007",
number="1",
pages="66--70",
publisher="University of Maribor-Slovenia",
address="Maribor - Slovinsko",
isbn="978-961-248-054-7"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10200
[oecd_tree_obor_nazev] => 1.2 Computer and information sciences
[oecd_tree_podobor_id] => 10201
[oecd_tree_podobor_nazev] => Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8)
[poznamka_metriky] =>
[nazev_en] => Numerical methods for continuous-time control systems
[popis_en] => Discretization is necessary for the analysis and design of discrete-time systems. It is also useful for simulating continuous-time control systems on the digital computer. One of the simplest ways of discretizing or approximating a continuous-time plant is numerical approximation of differential equations. Difference equations can be obtained by discretizing differential equations - it is the first part of this contribution. The other way of discretization is discretization by z transformation of transfer function G(s). In this contribution is shown Euler's method and bili-near method of this transformation.
[klicova_slova_en] => Diskkretzation; continuous-time systems; discrete-time systems; Z-transform.
[vysledek_datum] => 2007-06-18T00:00:00+02:00
)
[6] => Array
(
[vysledek_id] => 28075
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 70044
[vysledek_rok] => 2007
[nazev] => Applications of Computational Geometry
[nazev_orig] => Applications of Computational Geometry
[duvernost_udaju_id] => S
[popis] => This paper deals with fundamental structures of computational geometry, the Voronoi diagram, and its geometric dual, the Delaunay triangulation. It surveys basic properties, algorithms for their construction and typical applications in network optimisation (Euclidean minimum spanning tree, Euclidean minimum Steiner tree) and robot motion planning in the plane with obstacles.
[popis_orig] => This paper deals with fundamental structures of computational geometry, the Voronoi diagram, and its geometric dual, the Delaunay triangulation. It surveys basic properties, algorithms for their construction and typical applications in network optimisation (Euclidean minimum spanning tree, Euclidean minimum Steiner tree) and robot motion planning in the plane with obstacles.
[klicova_slova] => computational geometry, Delaunay triangulation, Voronoi diagram, Euclidean minimum spanning tree, Euclidean minimum Steiner tree
[klicova_slova_orig] => computational geometry, Delaunay triangulation, Voronoi diagram, Euclidean minimum spanning tree, Euclidean minimum Steiner tree
[url] =>
[oecd_obor_id] => 10103
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ŠEDA, M.
[pocet_tvurcu] => 1
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-961-248-054-7
[identifikator_popis] => ISBN - Proceedings of CEEPUS WEB Summer School 2007 - "Information Systems in Automation"
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ŠEDA, M. Applications of Computational Geometry. In Proceedings of CEEPUS WEB Summer School 2007 - "Information Systems in Automation". Maribor (Slovenia): University of Maribor, Faculty of Electrical Engineering and Computer Science, 2007. p. 1-6. ISBN: 978-961-248-054-7.
[citace_html] => ŠEDA, M. Applications of Computational Geometry. In Proceedings of CEEPUS WEB Summer School 2007 - "Information Systems in Automation". Maribor (Slovenia): University of Maribor, Faculty of Electrical Engineering and Computer Science, 2007. p. 1-6. ISBN: 978-961-248-054-7.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT28075,
author="Miloš {Šeda}",
title="Applications of Computational Geometry",
booktitle="Proceedings of CEEPUS WEB Summer School 2007 - {"}Information Systems in Automation{"}",
year="2007",
pages="1--6",
publisher="University of Maribor, Faculty of Electrical Engineering and Computer Science",
address="Maribor (Slovenia)",
isbn="978-961-248-054-7"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 10000
[oecd_tree_oblast_nazev] => 1. Natural Sciences
[oecd_tree_obor_id] => 10100
[oecd_tree_obor_nazev] => 1.1 Mathematics
[oecd_tree_podobor_id] => 10103
[oecd_tree_podobor_nazev] => Statistics and probability
[poznamka_metriky] =>
[nazev_en] => Applications of Computational Geometry
[popis_en] => This paper deals with fundamental structures of computational geometry, the Voronoi diagram, and its geometric dual, the Delaunay triangulation. It surveys basic properties, algorithms for their construction and typical applications in network optimisation (Euclidean minimum spanning tree, Euclidean minimum Steiner tree) and robot motion planning in the plane with obstacles.
[klicova_slova_en] => computational geometry, Delaunay triangulation, Voronoi diagram, Euclidean minimum spanning tree, Euclidean minimum Steiner tree
[vysledek_datum] => 2007-09-01T00:00:00+02:00
)
[7] => Array
(
[vysledek_id] => 28151
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 71224
[vysledek_rok] => 2007
[nazev] => Mechatronics Implementation Methodology At New Products Development And Design
[nazev_orig] => Mechatronics Implementation Methodology At New Products Development And Design
[duvernost_udaju_id] => S
[popis] => The functional and spatial integration of components including synthesis of various
technologies is a decisive characteristic feature of mechatronics. The arrangement of these
components ensures their function; specifically in terms of their reliability and reasonable
costs. Development and designing of new products as that of mechatronic systems needs
therefore to start from functions and only then to decide which configuration of components
and technologies would be the most appropriate for accomplishment.
[popis_orig] => The functional and spatial integration of components including synthesis of various
technologies is a decisive characteristic feature of mechatronics. The arrangement of these
components ensures their function; specifically in terms of their reliability and reasonable
costs. Development and designing of new products as that of mechatronic systems needs
therefore to start from functions and only then to decide which configuration of components
and technologies would be the most appropriate for accomplishment.
[klicova_slova] => Mechatronics, Products Development, Design
[klicova_slova_orig] => Mechatronics, Products Development, Design
[url] =>
[oecd_obor_id] => 20204
[odpovedny_utvar_id] => 183
[odpovedny_utvar_nazev] => Ústav výrobních strojů, systémů a robotiky
[odpovedny_utvar_zkratka] => ÚVSSR
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => cs
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => BŘEZINA, T.; SINGULE, V.; HADAŠ, Z.
[pocet_tvurcu] => 3
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-7231-314-3
[identifikator_popis] => ISBN - AiM 2007
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => BŘEZINA, T.; SINGULE, V.; HADAŠ, Z. Mechatronics Implementation Methodology At New Products Development And Design. In AiM 2007. 1. Brno: Expertia o.p.s., 2007. s. 1-18. ISBN: 978-80-7231-314-3.
[citace_html] => BŘEZINA, T.; SINGULE, V.; HADAŠ, Z. Mechatronics Implementation Methodology At New Products Development And Design. In AiM 2007. 1. Brno: Expertia o.p.s., 2007. s. 1-18. ISBN: 978-80-7231-314-3.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT28151,
author="Tomáš {Březina} and Vladislav {Singule} and Zdeněk {Hadaš}",
title="Mechatronics Implementation Methodology At New Products Development And Design",
booktitle="AiM 2007",
year="2007",
series="1",
number="1",
pages="1--18",
publisher="Expertia o.p.s.",
address="Brno",
isbn="978-80-7231-314-3"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20200
[oecd_tree_obor_nazev] => 2.2 Electrical engineering, Electronic engineering, Information engineering
[oecd_tree_podobor_id] => 20204
[oecd_tree_podobor_nazev] => Robotics and automatic control
[poznamka_metriky] =>
[nazev_en] => Mechatronics Implementation Methodology At New Products Development And Design
[popis_en] => The functional and spatial integration of components including synthesis of various
technologies is a decisive characteristic feature of mechatronics. The arrangement of these
components ensures their function; specifically in terms of their reliability and reasonable
costs. Development and designing of new products as that of mechatronic systems needs
therefore to start from functions and only then to decide which configuration of components
and technologies would be the most appropriate for accomplishment.
[klicova_slova_en] => Mechatronics, Products Development, Design
[vysledek_datum] => 2007-12-06T00:00:00+01:00
)
[8] => Array
(
[vysledek_id] => 28176
[vysledek_druh_id] => CONPA
[ex_vysledek_id] => 71264
[vysledek_rok] => 2007
[nazev] => Frequency Analyzer with Labview
[nazev_orig] => Frequency Analyzer with Labview
[duvernost_udaju_id] => S
[popis] => In the last years the technical diagnostics has been increasingly using a computational technology in order to implement models of simple and also more complicated measuring instruments.
This contribution deals with the creation of a simple frequency analyzer model, operated by the Labview 7 Express software, and with applying this analyzer to the diagnostics of simulated vibrations
[popis_orig] => In the last years the technical diagnostics has been increasingly using a computational technology in order to implement models of simple and also more complicated measuring instruments.
This contribution deals with the creation of a simple frequency analyzer model, operated by the Labview 7 Express software, and with applying this analyzer to the diagnostics of simulated vibrations
[klicova_slova] => Frequency analyzer, Labview, Vibrio
[klicova_slova_orig] => Frequency analyzer, Labview, Vibrio
[url] =>
[oecd_obor_id] => 20206
[odpovedny_utvar_id] => 207
[odpovedny_utvar_nazev] => Ústav automatizace a informatiky
[odpovedny_utvar_zkratka] => ÚAI
[nadrazena_soucast_id] => 4
[nadrazena_soucast_zkratka] => FSI
[nadrazena_soucast_nazev] => Fakulta strojního inženýrství
[originalni_jazyk] => en
[schvalil_id] => 999999
[schvaleno] => 2016-04-15
[vykazovat_riv] => 0
[vykazovat_riv_zmeny] => 1
[slozka_id] =>
[posledni_diagnostika] =>
[vycet_osob] => ZUTH, D.; ROJKA, A.
[pocet_tvurcu] => 2
[tvurci_ids] =>
[poznamka] =>
[typ_nazev] =>
[kod_doi] =>
[kod_dspace] =>
[rok_vytvoreni] =>
[pocet_zaznamu] =>
[zverejneno] => 1
[prvni_autor] =>
[korespondencni_autor] =>
[posledni_autor] =>
[znamka] =>
[kategorie_nazev] => Publikační výsledky
[druh_nazev] => Stať ve sborníku v databázi WoS či Scopus
[druh_popis] => Stať ve sborníku v databázi WoS či Scopus
[stav] => Schválený
[vysledek_kategorie_id] => PV
[vysledek_system_kategorie_id] => PU
[vysledek_stav_id] => 3
[vlozil] => Informační systém Automat
[upravil] => Informační systém Automat
[ins_uid] => 999999
[upd_uid] => 999999
[ins_ts] => 2025-09-22
[upd_ts] => 2025-09-22
[status] => 9
[identifikator] => ISBN 978-80-248-1427-8
[identifikator_popis] => ISBN - Sborník konference Tvorba softwaru 2007
[riv_dodavka_id] =>
[riv_dodavka_oznaceni] =>
[riv_dodavka_rok] =>
[diagnostika_pocet] => 0
[diagnostika_pocet_chyba] => 0
[diagnostika_pocet_upozorneni] => 0
[diagnostika_pocet_informace] => 0
[citace_text] => ZUTH, D.; ROJKA, A. Frequency Analyzer with Labview. In Sborník konference Tvorba softwaru 2007. Ostrava: VŚB TU Ostrava, 2007. p. 219-225. ISBN: 978-80-248-1427-8.
[citace_html] => ZUTH, D.; ROJKA, A. Frequency Analyzer with Labview. In Sborník konference Tvorba softwaru 2007. Ostrava: VŚB TU Ostrava, 2007. p. 219-225. ISBN: 978-80-248-1427-8.
[citace_rtf] =>
[citace_bibtex] => @inproceedings{BUT28176,
author="Daniel {Zuth} and Aleš {Rojka}",
title="Frequency Analyzer with Labview",
booktitle="Sborník konference Tvorba softwaru 2007",
year="2007",
number="1",
pages="219--225",
publisher="VŚB TU Ostrava",
address="Ostrava",
isbn="978-80-248-1427-8"
}
[vykazano] =>
[vykazano_aspon_jednou] =>
[identifikacni_kod] =>
[neautorsky_vysledek] => 0
[if] =>
[if_q] =>
[if_m17_q] =>
[if_m25_q] =>
[if_d] =>
[if_m17_d] =>
[if_m25_d] =>
[if_percentil] =>
[if_m17_percentil] =>
[if_m25_percentil] =>
[ais] =>
[ais_m17_q] =>
[ais_m25_q] =>
[ais_m17_d] =>
[ais_m25_d] =>
[ais_m17_percentil] =>
[ais_m25_percentil] =>
[jci] =>
[jci_q] =>
[jci_percentil] =>
[ef] =>
[scopus_sjr] =>
[scopus_sjr_q] =>
[scopus_sjr_d] =>
[nature_index_group] =>
[incites_times_cited] =>
[incites_open_access] =>
[incites_jnci] =>
[incites_is_int_collab] =>
[incites_is_industry_collab] =>
[incites_esi_hot_paper] =>
[incites_esi_highly_cited_paper] =>
[incites_avg_cnci] =>
[incites_avg_percentile] =>
[scival_citations_count] =>
[scival_fwci] =>
[core_rank] => NA
[oecd_tree_oblast_id] => 20000
[oecd_tree_oblast_nazev] => 2. Engineering and Technology
[oecd_tree_obor_id] => 20200
[oecd_tree_obor_nazev] => 2.2 Electrical engineering, Electronic engineering, Information engineering
[oecd_tree_podobor_id] => 20206
[oecd_tree_podobor_nazev] => Computer hardware and architecture
[poznamka_metriky] =>
[nazev_en] => Frequency Analyzer with Labview
[popis_en] => In the last years the technical diagnostics has been increasingly using a computational technology in order to implement models of simple and also more complicated measuring instruments.
This contribution deals with the creation of a simple frequency analyzer model, operated by the Labview 7 Express software, and with applying this analyzer to the diagnostics of simulated vibrations
[klicova_slova_en] => Frequency analyzer, Labview, Vibrio
[vysledek_datum] => 2007-06-04T00:00:00+02:00
)
)
)
Array
(
[total] => 2086
[page] => 56
[count] => 9
[n_pages] => 140
[pagelen] => 15
[odkaz] => typVysledku=&rok=&ftext=&btnSubmit=1
[base_detail] => /veda/publikace/detail/
[base_page] => /veda/publikace
[vysledek] => Array
(
[0] => Array
(
[quotations] => DAVIDOVÁ, O.
[title] => Control circuit diagnostics trough unit step response
[typ] => PV
[year] => 2007
[id_vav] => 27797
)
[1] => Array
(
[quotations] => KŘUPKA, I.; HARTL, M.; POLIŠČUK, R.
[title] => The Effect of Boundary Films on Dented Surfaces Operated under Thin EHD Lubrication
[typ] => PV
[year] => 2007
[id_vav] => 27852
)
[2] => Array
(
[quotations] => NETUŠIL, Z.
[title] => Solving the Travelling Salesman Problem Using GAMS
[typ] => PV
[year] => 2007
[id_vav] => 27893
)
[3] => Array
(
[quotations] => LACKO, B.
[title] => Systémové a technologické aspekty řízení znalostí s využitím inteligentní automatizace
[typ] => PV
[year] => 2007
[id_vav] => 27906
)
[4] => Array
(
[quotations] => HOUŠKA, P.; ONDROUŠEK, V.; HOUFEK, M.; VĚCHET, S.
[title] => Possibilities of control experimental testing devices for biomechanics
[typ] => PV
[year] => 2007
[id_vav] => 28028
)
[5] => Array
(
[quotations] => ŠVARC, I.
[title] => Numerical methods for continuous-time control systems
[typ] => PV
[year] => 2007
[id_vav] => 28074
)
[6] => Array
(
[quotations] => ŠEDA, M.
[title] => Applications of Computational Geometry
[typ] => PV
[year] => 2007
[id_vav] => 28075
)
[7] => Array
(
[quotations] => BŘEZINA, T.; SINGULE, V.; HADAŠ, Z.
[title] => Mechatronics Implementation Methodology At New Products Development And Design
[typ] => PV
[year] => 2007
[id_vav] => 28151
)
[8] => Array
(
[quotations] => ZUTH, D.; ROJKA, A.
[title] => Frequency Analyzer with Labview
[typ] => PV
[year] => 2007
[id_vav] => 28176
)
)
)